Updated JORC Disclosures
Released
Released
Announcement PDF
ASX / MEDIA ANNOUNCEMENT
17 September 2021
Updated JORC Disclosures
RareX Limited (ASX: REE; RareX or the Company) provides additional disclosures with respect to
its announcement of 2 September 2021 entitled Thick Zone of Primary Rare Earth-Niobium
Mineralisation Intersected at Cummins Range Project.
The Company confirms that the recently updated Mineral Resource of 18.8Mt at 1.15% TREO +
0.14% Nb2O5 is comprised of an Indicated Resource of 11.1 million tonnes at 1.34% TREO + 0.17%
Nb2O5 and an Inferred Resource of 7.7 at 0.88% TREO+ 0.11% Nb2O5 (0.5% TREO cut-off) 1.
The drill collar table for the visual results identified in the announcements is as follows:
Hole ID
CDX0001
CDX0002
CDX0003
CDX0004
CDX0005
CDX0006
CDX0007
East
MGA
307286
307077
307192
307341
307140
307191
307267
North
MGA
7866642
7866650
7866696
7866505
7866598
7866536
7866496
mRL
392
392
392
392
392
392
392
End
Depth
11.7
135.8
96.5
155.1
164.5
215.8
198.8
Azimuth
Dip
Type
Assays
50
50
50
50
50
50
50
60
60
60
60
60
60
60
Diamond
Diamond
Diamond
Diamond
Diamond
Diamond
Diamond
Not Assayed
Awaiting
Awaiting
Awaiting
Awaiting
Awaiting
Awaiting
The Company also provides additional disclosure in the JORC Tables in Appendix 1.
This announcement has been authorised for release by the Managing Director of RareX Limited.
For further information, please contact:
RareX Limited
Jeremy Robinson
Executive Director
Ph: 08 6143 6720
Media Enquiries
Nicholas Read
Read Corporate
Ph: 08 9388 1474
1
Refer ASX/Media announcement of 19 July 2021 “RareX delivers major resource upgrade at Cummins Range Rare Earths
Project, WA
RareX Limited
Unit 6, 94 Rokeby Road, Subiaco WA 6008 Ph: 08 6383 6593 ACN: 105 578 756
1
Competent Person’s Statements
Information in this release and the announcement dated 2 September 2021 that relates to Exploration
Results is based on and fairly represents information and supporting documentation reviewed or
compiled by Mr Guy Moulang, an experienced geologist engaged by RareX Limited. Mr Moulang is a
Member of the Australian Institute of Geoscientist and has sufficient experience which is relevant to the
styles of mineralisation and types of deposits under consideration and to the activities being undertaken
to qualify as a Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting
of Exploration Results, Mineral Resources and Ore Reserves”. Mr Moulang consents to the inclusion in
this release of the matters based on his information in the form and context in which it appears and
confirms there have been no material changes since the information was first reported.
The mineral resource estimate in this announcement were reported by the Company in accordance with
listing rule 5.8 on 19 July 2021. The Company confirms it is not aware of any new information or data that
materially affects the information included in the previous announcement and that all material
assumptions and technical parameters underpinning the estimates in the previous announcement
continue to apply and have not materially changed.
RareX Limited
Unit 6, 94 Rokeby Road, Subiaco WA 6008 Ph: 08 6383 6593 ACN: 105 578 756
2
Appendix 1: JORC Table
JORC Code, 2012 Edition – Table 1
Cummins Range Section 1 Sampling Techniques and Data
Criteria
Sampling
techniques
Drilling
Techniques
Drill
Sample
Recovery
Logging
Subsampling
techniques
JORC Code Explanation
Nature and quality of sampling (eg cut channels, random chips, or specific specialised industry
standard measurement tools appropriate to the minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as
limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample representivity and the appropriate
calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the Public Report. In cases
where ‘industry standard’ work has been done this would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a
30 g charge for fire assay’). In other cases more explanation may be required, such as where there
is coarse gold that has inherent sampling problems. Unusual commodities or
mineralisation types (eg submarine nodules) may warrant disclosure of detailed information.
Drill type (eg core, reverse circulation, open- hole hammer, rotary air blast, auger, Bangka, sonic,
etc) and details (eg core diameter, triple or standard tube, depth of diamond tails, face-sampling
bit or other type, whether core is oriented and if so, by what method, etc).
•
•
Reverse circulation (RC) drilling and diamond drilling. Diamond drilling was done
using PQ and HQ size.
Method of recording and assessing core and chip sample recoveries and results assessed.
Measures taken to maximise sample recovery and ensure representative nature of the samples.
Whether a relationship exists between sample recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of fine/coarse material.
Whether core and chip samples have been geologically and geotechnically logged to a level of
detail to support appropriate Mineral Resource estimation, mining studies and metallurgical
studies.
Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc)
photography.
The total length and percentage of the relevant intersections logged.
If core, whether cut or sawn and whether quarter, half or all core taken.
If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry.
For all sample types, the nature, quality and appropriateness of the sample preparation
technique.
•
Drill sample recovery was logged and sample recovery for drill holes referenced in
this announcement are CDX0002 95%, CDX0004 98%, CDX0005 100%, CDX0006
97%, CDX0007 93%.
•
All metres drilled had a geology log completed. Geology logs were aided using
geochemical analysis from a portable XRF.
The detail of logging is appropriated for Mineral Resource estimation.
RareX Limited
Unit 6, 94 Rokeby Road, Subiaco WA 6008 Ph: 08 6383 6593 ACN: 105 578 756
•
•
•
•
•
•
•
•
The Cummins Range Rare Earth deposit is being drill tested with RC drilling and
diamond drilling.
No assay results have been released in this announcement.
Preliminary analysis of all metres drilled is completed using a portable Niton XRF
XL5. On diamond drilling core an analysis is done on every metre of the drill core, as
close to the metre mark as possible to avoid any bias.
The mentioned drill holes in this announcement are diamond drill holes and have
been sampled to geological intervals and kept close to 1m samples.
Core is cut in half or quarters with a brick saw to send to the laboratory
This technique is industry standard
For drill holes CDX0002, CDX0005, CDX0006 and CDX0007 the drill core was cut in
half and send for assay. For drill hole CDX0004 a quarter of the core was sent to the
laboratory for sampling.
This technique is the industry standard
3
and sample
preparation
Quality of
assay data
and
laboratory
tests
Verification
of sampling
and
assaying
Location of
data points
Quality control procedures adopted for all sub-sampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is representative of the in situ material collected,
including for instance results for field duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the material being sampled.
The nature, quality and appropriateness of the assaying and laboratory procedures used and
whether the technique is considered partial or total
For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in
determining the analysis including instrument make and model, reading times, calibrations factors
applied and their derivation, etc.
Nature of quality control procedures adopted (eg standards, blanks, duplicates, external
laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and precision have
been established.
The verification of significant intersections by either independent or alternative company
personnel.
The use of twinned holes.
The verification of significant intersections by either independent or alternative company
personnel.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches,
mine workings and other locations used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Data
spacing
and
distribution
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to establish the degree of geological and
grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s)
and classifications applied.
Whether sample compositing has been applied.
Orientation
of data in
relation to
geological
structure
Whether the orientation of sampling achieves unbiased sampling of possible structures and the
extent to which this is known, considering the deposit type.
•
No assays have been released in this announcement
Preliminary analysis of all metres drilled is completed using a portable Niton XRF
XL5. The XRF has been calibrated using dozens of pulps from the 2020 drilling
program. The XRF does not provide an accurate grade of REE, but it will detect any
anomalous Ce, La, Nd, Pr, Y and Nb.
Standards and blanks are analysed prior to and after batch analysis.
•
•
No assays have been released in this announcement.
No verification has been done by independent personnel.
•
•
•
Drill hole collars were located by handheld GPS
All coordinates are in MGA Zone 52H 1994
Topographic control is maintained by the use of previously surveyed drill holes. The
Cummins Range deposit is located in flat terrain.
Down hole surveys were taken every 30m, using a digital Reflex multi shot camera.
The purposed of the drill program is to test the new geological model, including
new mineralised structures.
This drill spacing will be sufficient to demonstrate grade continuity to support the
definition of a Mineral Resource as per the JORC 2012 code
•
•
•
•
•
•
The angled drill holes were directed as best possible across the known geology. The
new geological interpretation is mineralised structures are striking at 320 degrees
and dipping towards the south west at 50-60 degrees. Drill holes testing these
structures are being drilled at 50 degrees azimuth.
If the relationship between the drilling orientation and the orientation of key mineralised
structures is considered to have introduced a sampling bias, this should be assessed and reported
if material.
RareX Limited
Unit 6, 94 Rokeby Road, Subiaco WA 6008 Ph: 08 6383 6593 ACN: 105 578 756
4
Sample
security
The measures taken to ensure sample security
•
Drill samples are delivered to Halls Creek by RareX staff. Then the samples are
transported from Halls Creek to Perth via a reputable transport company.
Cummins Range Section 2 Reporting of Exploration Results
Criteria
Mineral
tenement and
land tenure
status
Exploration
done by other
parties
JORC Code Explanation
Type, reference name/number, location and ownership including agreements or material issues
with third parties such as joint ventures, partnerships, overriding royalties, native title interests,
historical sites, wilderness or national park and environmental settings.
The security of the tenure held at the time of reporting along with any known impediments to
obtaining a licence to operate in the area.
Acknowledgment and appraisal of exploration by other parties.
•
•
Geology
Deposit type, geological setting and style of mineralisation.
•
Drill hole
information
A summary of all information material to the understanding of the exploration results including
a tabulation of the following information for all Material drill holes:
easting and northing of the drill hole collar
elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar
dip and azimuth of the hole
down hole length and interception depth
hole length.
•
RareX Limited
Unit 6, 94 Rokeby Road, Subiaco WA 6008 Ph: 08 6383 6593 ACN: 105 578 756
The Cummins Range REO deposit is located on tenement E80/5092 and is 100%
owned by Cummins Range Pty Ltd which is a wholly owned subsidiary of RareX Ltd.
Cummins Range Pty Ltd has purchased the tenement from Element 25 with a
potential capped royalty payment of $1m should a positive PFS be completed
within 36 months of purchase finalisation.
CRA Exploration defined REO mineralisation at Cummins Range in 1978 using
predominantly aircore drilling. Navigator Resources progressed this discovery with
additional drilling after purchasing the tenement in 2006. Navigator announced a
resource estimate in 2008. Kimberly Rare Earths drilled additional holes and
upgraded the resource estimate in 2012.
The Cummins Range REO deposit occurs within the Cummins Range carbonatite
complex which is a 2.0 km diameter near-vertical diatreme pipe that has been
deeply weathered but essentially outcropping with only thin aeolian sand cover in
places. The diatreme pipe consists of various mafic to ultramafic rocks with later
carbonatite intrusions. The primary ultramafic and carbonatite rocks host low to
high grade rare earth elements with back ground levels of 1000-2000ppm TREO and
high grade zones up to 8% TREO. The current resource sits primarily within the
oxidised/weathered zone which reaches to 120m below the surface. Metallurgical
studies by previous explorers show the rare earth elements are hosted by Monazite
which is a common and favourable host for rare earth elements.
Drill hole locations are shown on the collar plan Figure 1 and in the collar table.
5
Data
aggregation
methods
Relationship
between
mineralisation
widths and
intercept
lengths
Diagrams
Balanced
reporting
Other
substantive
exploration
data
Further work
If the exclusion of this information is justified on the basis that the information is not Material
and this exclusion does not detract from the understanding of the report, the Competent Person
should clearly explain why this is the case.
In reporting Exploration Results, weighting averaging techniques, maximum and/or minimum
grade truncations (eg cutting of high grades) and cut-off grades are usually Material and
should be stated.
Where aggregate intercepts incorporate short lengths of high grade results and longer lengths
of low grade results, the procedure used for such aggregation should be stated and some
typical examples of such aggregations should be shown in detail.
The assumptions used for any reporting of metal equivalent values should be clearly stated.
These relationships are particularly important in the reporting of Exploration Results
If the geometry of the mineralisation with respect to the drill hole angle is known, its nature
should be reported.
If it is not known and only the down hole lengths are reported, there should be a clear
statement to this effect (eg ‘down hole length, true width not known’).
•
•
No assay results have been released in this announcement.
No significant intercepts were calculated
•
Assay results have not been received. When assays are available the RareX
geological team will evaluate the geometry of the mineralisation.
Appropriate maps and sections (with scales) and tabulations of intercepts should be included
for any significant discovery being reported These should include, but not be limited to a plan
view of drill hole collar locations and appropriate sectional views.
Where comprehensive reporting of all Exploration Results is not practicable, representative
reporting of both low and high grades and/or widths should be practiced to avoid misleading
reporting of Exploration Results.
Other exploration data, if meaningful and material, should be reported including (but not
limited to): geological observations; geophysical survey results; geochemical survey results; bulk
samples – size and method of treatment; metallurgical test results; bulk density, groundwater,
geotechnical and rock characteristics; potential deleterious or contaminating substances.
•
Drill collar locations are shown in Figure 1
•
Reporting is considered balanced
•
This announcement describes the initial geological interpretations of the first
diamond drill holes at Cummins Range since the early 1980s. RareX have recently
completed a JORC compliant resource upgrade of 18.8Mt at 1.15% TREO + 0.14%
Nb2O3, announced on 19th July 2021. Metallurgical studies are currently being
conducted. Mining study drill holes have been drilled in recent weeks, and water
monitoring bores will be drilled next month.
The nature and scale of planned further work (eg tests for lateral extensions or large scale step
out drilling.
Diagrams clearly highlighting the areas of possible extensions, including the main geological
interpretations and future drilling areas, provided this information is not commercially
sensitive.
•
•
•
Diamond and RC drilling will continue into October.
Water monitoring bores will be drilled next month.
Metallurgical tests are being conducted
RareX Limited
Unit 6, 94 Rokeby Road, Subiaco WA 6008 Ph: 08 6383 6593 ACN: 105 578 756
6
Share your feedback
Discover