ACQUISITION OF WELD NORTH PROJECT
Released
Released
Announcement PDF
ASX / MEDIA ANNOUNCEMENT
12 December 2019
ACQUISITION OF WELD NORTH PROJECT
HIGHLIGHTS
•
RareX acquires E38/3455 known as the Weld North Project
•
Located 84km directly north of Lynas Corporation’s Mt Weld rare earths mine in WA
•
Lynas recently selected Kalgoorlie as the location to build its new $500m cracking and
leaching plant for processing rare earth material from its Mt Weld mine
•
Weld North located approximately 350km from Kalgoorlie
•
Acquisition complements RareX’s flagship Cummins Range Project also located in WA
•
Evaluation underway on prospective areas of the overall tenement package
Australian rare earths developer, RareX Limited (ASX: REE) (RareX) or the Company) is pleased to
announce that it has submitted a tenement application with the Western Australian Department of
Mines Industry Regulation and Safety (DMIRS) for exploration licence E38/3455.
The project is located north of Laverton in Western Australia covering a large, circular magnetic
anomaly prospective for being caused by a carbonatite intrusive complex similar to those that host
the majority of the World's existing rare earth element production, including the world class Mt
Weld mine owned by Lynas Corporation Limited and RareX’s Cummins Range Rare Earth Project
both of which are located in Western Australia. RareX’s new project is known as Weld North.
Weld North Project Overview
The Weld North Project is defined by a circular magnetic anomaly target located entirely within
RareX’s exploration license application E38/3455 and its location 84 kilometers directly north of the
Mt Weld carbonatite-hosted rare earth element (REE) deposit held by Lynas Corporation Limited
(ASX: LYC, Mkt Cap A$1.5bn).
Figure 1: Airborne magnetic
anomaly image showing the Weld
North circular anomaly which
RareX consider to be prospective
for being caused by a REE-bearing
circular carbonatite intrusive
complex or a barren late stage
granite intrusive and sitting below
regolith cover which masks the
buried bedrock source for this
magnetic anomaly.
The Lynas Mt Weld carbonatite complex forms a strong circular magnetic anomaly with a diameter
of 4km and which hosts a total rare earth element oxide (TREO) resource of 55.2 Mt at 5.4% TREO
for 2.98 Mt of contained rare earth oxide (REO) (2.5% TREO cut-off) (Source: Lynas Corporation
Limited 2019 Annual Report announced to the ASX on 2 October 2019).
By comparison, the Weld North circular magnetic anomaly has a diameter of 5km with a similar
magnetic anomaly pattern to the Mt Weld carbonatite complex (Figures 1 and 2), where the
magnetic anomaly amplitude is less pronounced indicating less magnetite content of the rocks. This
characteristic may not have a bearing on the REE potential of the target, since many REE-bearing
carbonatite phases are non-magnetic. For example, the majority of the current RareX Cummins
Range REE resource occurs closely associated with non-magnetic carbonatite intrusive rocks and
shear zones within a circular diatreme structure (See REE ASX announcement dated 12 November
2019).
It is possible that the Weld North magnetic anomaly is caused by an Archean granitic intrusion,
where the bedrock geology does not outcrop in the center of the magnetic anomaly target, due to
regolith and soil cover. RareX plans to undertake reconnaissance geochemical sampling and drill
testing to assess if the source of the magnetic anomaly target is caused by a carbonatite intrusion,
similar to Mt Weld, or a granitic intrusion.
The circular shape and size comparison to Mt Weld indicates that the Weld North magnetic anomaly
is highly prospective for a significant rare earths’ discovery (Figure 2). RareX is committed to exciting
green fields exploration targets like Weld North as it continues to progress its flagship Cummins
Range Project Rare Earths Project towards production.
Figure 2: Comparison of airborne magnetic anomaly images of the Mt Weld REE mineralised
carbonatite (left) and RareX Weld North magnetic target (right), shown as black and white 1st
derivative filtered images.
Next Steps
RareX will now proceed with DMIRS requirement for granting the tenement and will carry out
reconnaissance mapping work before commencing ground disturbing exploration following granting,
anticipated to be in early to mid-2020. RareX remains focussed on progressing its flagship Cummins
Range REE project towards production, with a passive seismic survey currently in progress ahead of
the maiden drill program to commence next quarter to help explore target areas, better define the
geometry of mineralisation and to expand the existing resource.
Jeremy Robinson
Executive Director
RareX Limited
Competent person statement
Information in this release that relates to Exploration Results is based on and fairly represents
information and supporting documentation prepared and compiled by Mr Leo Horn, an experienced
geologist consulting for Sagon Resources Limited. Mr Horn is a Member of the Australian Institute of
Geoscientist sand has sufficient experience which is relevant to the styles of mineralisation and
types of deposits under consideration and to the activities being undertaken to qualify as a
Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves”. Mr Horn consents to the inclusion in this
release of the matters based on his information in the form and context in which it appears.
Additional information regarding Mt Weld Mineral Resource estimate
JORC Classification
Measured
Indicated
Inferred
Total
Million tonnes
17.3
12.0
25.9
55.2
TREO*
%
7.9
5.5
3.6
5.4
Contained REO
'000 tones
1,370
660
930
2,980
* TREO = total Rare Earth Oxides (La2 O3 , CeO2 , Pr6 O11, Nd2 O3 , Sm2 O3 , Eu2 O3 , Gd2 O3 , Tb4 O7 , Dy2 O3 , Ho2 O3 ,
Er2 O3 , Tm2 O3 , Yb2 O3 , Lu2 O3 ) + Yttrium (Y2 O3 ). Totals may not balance due to rounding of figures. Mineral
Resources have been reported above a cut-off of 2.5% TREO.
The Mineral Resource estimate for the Mt Weld Rare Earth Deposit referred to in this
announcement was reported by Lynas Corporation Ltd (Lynas) as of 30 June 2019. The Mineral
Resource estimate was first reported by Lynas in accordance with the requirements of ASX Listing
Rule 5.8 in its ASX announcement titled “Lynas announces a 60% increase to Mt Weld Ore Reserves,
one of the world’s richest sources of Rare Earths”, dated 6 August 2018. Lynas most recently
confirmed in its 2019 Annual Report announced to the ASX on 2 October 2019 that all material
assumptions and technical parameters underpinning the estimated Mineral Resources set out in the
ASX announcement dated 6 August 2018 continue to apply and have not materially changed, with
the exception of depletion of stockpiles processed and minor depletion of the in-situ resources from
mining.
Appendix 1
Cummins Range Section 1 Sampling Techniques and Data
Criteria
Sampling
techniques
JORC Code Explanation
Nature and quality of sampling (eg cut channels, random chips, or specific specialised
industry standard measurement tools appropriate to the minerals under investigation,
such as down hole gamma sondes, or handheld XRF instruments, etc). These examples
should not be taken as limiting the broad meaning of sampling.
No drilling undertaken
Include reference to measures taken to ensure sample representivity and the appropriate
calibration of any measurement tools or systems used.
Aspects of the determination of mineralisation that are Material to the Public Report. In
cases where ‘industry standard’ work has been done this would be relatively simple (eg
‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire assay’). In other cases more explanation may
be required, such as where there is coarse gold that has inherent sampling problems.
Unusual commodities or
mineralisation types (eg submarine nodules) may warrant disclosure of detailed
information.
Drilling
Techniques
Drill type (eg core, reverse circulation, open- hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (eg core diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what
method, etc).
No drilling undertaken
Drill Sample
Recovery
Method of recording and assessing core and chip sample recoveries and results assessed.
No drilling underaken
Measures taken to maximise sample recovery and ensure representative nature of the
samples.
Whether a relationship exists between sample recovery and grade and whether sample
bias may have occurred due to preferential loss/gain of fine/coarse material.
RareX Limited
Suite 23, 513 Hay Street, Subiaco WA 6008 Ph: 08 6143 6720 ACN: 105 578 756
Logging
Whether core and chip samples have been geologically and geotechnically logged to a
level of detail to support appropriate Mineral Resource estimation, mining studies and
metallurgical studies.
No drilling undertaken
Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc)
photography.
The total length and percentage of the relevant intersections logged.
Sub-sampling
techniques and
sample
preparation
If core, whether cut or sawn and whether quarter, half or all core taken.
No drilling undertaken
If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or
dry.
For all sample types, the nature, quality and appropriateness of the sample preparation
technique.
Quality control procedures adopted for all sub-sampling stages to maximise representivity
of samples.
Measures taken to ensure that the sampling is representative of the in situ material
collected, including for instance results for field duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the material being sampled.
Quality of assay
data and
laboratory tests
The nature, quality and appropriateness of the assaying and laboratory procedures used
and whether the technique is considered partial or total
For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters
used in determining the analysis including instrument make and model, reading times,
calibrations factors applied and their derivation, etc.
Nature of quality control procedures adopted (eg standards, blanks, duplicates, external
laboratory checks) and whether acceptable levels of accuracy (ie lack of bias) and
precision have been established.
RareX Limited
Suite 23, 513 Hay Street, Subiaco WA 6008 Ph: 08 6143 6720 ACN: 105 578 756
No drilling undertaken
Verification of
sampling and
assaying
The verification of significant intersections by either independent or alternative company
personnel.
No drilling undertaken
The use of twinned holes.
The verification of significant intersections by either independent or alternative company
personnel.
Discuss any adjustment to assay data.
Location of data
points
Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys),
trenches, mine workings and other locations used in Mineral Resource estimation.
No drilling undertaken
Specification of the grid system used.
Quality and adequacy of topographic control.
Data spacing and
distribution
Data spacing for reporting of Exploration Results.
No drilling undertaken
Whether the data spacing and distribution is sufficient to establish the degree of
geological and grade continuity appropriate for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications applied.
Whether sample compositing has been applied.
Orientation of
data in relation to
geological
structure
Whether the orientation of sampling achieves unbiased sampling of possible structures
and the extent to which this is known, considering the deposit type.
Sample security
The measures taken to ensure sample security
No drilling undertaken
If the relationship between the drilling orientation and the orientation of key mineralised
structures is considered to have introduced a sampling bias, this should be assessed and
reported if material.
RareX Limited
Suite 23, 513 Hay Street, Subiaco WA 6008 Ph: 08 6143 6720 ACN: 105 578 756
No drilling undertaken
Cummins Range Section 2 Reporting of Exploration Results
JORC Code Explanation
Criteria
Mineral tenement and
land tenure status
Type, reference name/number, location and ownership including agreements or
material issues with third parties such as joint ventures, partnerships, overriding
royalties, native title interests, historical sites, wilderness or national park and
environmental settings.
The security of the tenure held at the time of reporting along with any known
impediments to obtaining a licence to operate in the area.
The Cummins Range REO deposit is located on tenement E80/5092 and is
100% owned by RareX Pty Ltd which is a wholly owned subsidiary of
Sagon Resources Ltd RareX has purchased the tenement from Element 25
with a potential capped royalty payment of $1m should a positive PFS
study be completed within 36 months of purchase finalisation.
Exploration done by
other parties
Acknowledgment and appraisal of exploration by other parties.
CRA Exploration defined REO mineralisation at Cummins Range in 1978
using predominantly aircore drilling. Navigator Resources progressed this
discovery with additional drilling after purchasing the tenement in 2006.
Navigator announced a resource estimate in 2008. KRE drilled additional
holes and upgraded the resource estimate in 2012.
Geology
Deposit type, geological setting and style of mineralisation.
The Cummins Range REO deposit occurs within the Cummins Range
carbonatite complex which is a 2.0 km diameter near-vertical diatreme
pipe that has been deeply weathered but essentially outcropping with only
thin aeolian sand cover in places. The mineralisation has been defined
using a combination of grade and various regolith units defined by
detailed geological logging of all holes. The current resource sits primarily
within the oxidised/weathered zone.
Drill hole information
A summary of all information material to the understanding of the exploration results
including a tabulation of the following information for all Material drill holes:
No drilling undertaken
easting and northing of the drill hole collar
elevation or RL (Reduced Level – elevation above sea level in metres) of the drill
hole collar
dip and azimuth of the hole
down hole length and interception depth
hole length.
RareX Limited
Suite 23, 513 Hay Street, Subiaco WA 6008 Ph: 08 6143 6720 ACN: 105 578 756
If the exclusion of this information is justified on the basis that the information is not
Material and this exclusion does not detract from the understanding of the report, the
Competent Person should clearly explain why this is the case.
Data aggregation
methods
In reporting Exploration Results, weighting averaging techniques, maximum and/or
minimum grade truncations (eg cutting of high grades) and cut-off grades are usually
Material and should be stated.
No drilling undertaken
Where aggregate intercepts incorporate short lengths of high grade results and
longer lengths of low grade results, the procedure used for such aggregation should
be stated and some typical examples of such aggregations should be shown in detail.
The assumptions used for any reporting of metal equivalent values should be clearly
stated.
Relationship between
mineralisation widths
and intercept lengths
These relationships are particularly important in the reporting of Exploration Results
No drilling undertaken
If the geometry of the mineralisation with respect to the drill hole angle is known, its
nature should be reported.
If it is not known and only the down hole lengths are reported, there should be a
clear statement to this effect (eg ‘down hole length, true width not known’).
Diagrams
Appropriate maps and sections (with scales) and tabulations of intercepts should be
included for any significant discovery being reported These should include, but not be
limited to a plan view of drill hole collar locations and appropriate sectional views.
Maps and diagrams are included in the body of the announcement
Balanced reporting
Where comprehensive reporting of all Exploration Results is not practicable,
representative reporting of both low and high grades and/or widths should be
practiced to avoid misleading reporting of Exploration Results.
Reporting is considered balanced
Other substantive
exploration data
Other exploration data, if meaningful and material, should be reported including (but
not limited to): geological observations; geophysical survey results; geochemical
survey results; bulk samples – size and method of treatment; metallurgical test
results; bulk density, groundwater, geotechnical and rock characteristics; potential
deleterious or contaminating substances.
Historic open file government airborne magnetic data has been recently
reprocessed by Resource Potentials geophysical consultants based in
Perth, WA, to produce a series of enhanced magnetic anomaly images
with the specific aim to better define anomaly patterns that may be
produced by a buried carbonatite intrusive complex, where such intrusive
bodies often contain significant REE mineralisation. The outline of a
prospective magnetic anomaly zones was used to determine the area for
applying for an exploration licence with the WA DMIRS.
Further work
The nature and scale of planned further work (eg tests for lateral extensions or large
scale step out drilling.
Exploration is ongoing
RareX Limited
Suite 23, 513 Hay Street, Subiaco WA 6008 Ph: 08 6143 6720 ACN: 105 578 756
Diagrams clearly highlighting the areas of possible extensions, including the main
geological interpretations and future drilling areas, provided this information is not
commercially sensitive.
RareX Limited
Suite 23, 513 Hay Street, Subiaco WA 6008 Ph: 08 6143 6720 ACN: 105 578 756
RareX Limited
Suite 23, 513 Hay Street, Subiaco WA 6008 Ph: 08 6143 6720 ACN: 105 578 756
Share your feedback
Discover