MAJOR EXTENSION OF MINERALISATION AT DEPTH CONFIRMED
Released
Released
Announcement PDF
ASX Release: 25 May 2022
MAJOR EXTENSION OF MINERALISATION AT DEPTH CONFIRMED IN
INITIAL DRILLING AT CUMMINS RANGE
2022 drilling program off to a strong start, demonstrating the substantial scale of the deposit
HIGHLIGHTS
•
•
•
•
•
Significant visual mineralisation intersected in all three diamond holes drilled to date.
CDX0020 has intersected mineralisation 250m down-dip of CDX0016 (which intersected a
cumulative total of 51m at 2.5% TREO) in the main fault position.
CDX0020 also finished in mineralisation, extending the known mineralisation to at least 500m
below surface.
Logging of CDX0020 has been completed, with assays awaited.
Two drill rigs operating (one diamond and one RC rig) with further rig to arrive mid-June.
RareX Limited (ASX: REE; RareX or the Company) is pleased to advise that it has made an outstanding
start to the 2022 resource drilling program at its 100%-owned Cummins Range Rare Earths Project
in Western Australia, with initial drilling significantly extending the known mineralisation at depth.
Since commencing drilling in late April, the Company’s drilling contractors have completed 985m of
diamond drilling and 1,074m of reverse circulation (RC) drilling at Cummins Range.
The RC rig has been primarily tasked with drilling pre-collars and water monitoring bores for use as
part of the hydrological studies feeding into the ongoing technical studies.
Significantly, the three diamond drill holes completed to date have been successful in extending the
mineralisation at Cummins Range at depth, with all holes intersecting visual mineralisation. This is an
outstanding result which confirms the substantial scale and quality of the Cummins Range REE
deposit.
CDX0020
CDX0020 was drilled down-dip from CDX0016, drilled in 2021, which intersected multiple mineralised
zones comprising a cumulative total of 51m grading 2.5% TREO (see ASX announcement, 14 February
2022).
For more information, please contact:
Investors: Jeremy Robinson, Managing Director
Media: Nicholas Read, Read Corporate
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
Ph: +61 8 6383 6593
Ph: +61 8 9388 1474
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
ASX Release: 25 May 2022
CDX0020 has extended the Main Zone of rare earth mineralisation 250m down-dip, thereby doubling
the extent of the Main Zone mineralisation.
The hole was pushed on past the interpreted main fault position and continued to intersected rare
earths mineralisation and proximal high-grade phosphate “phoscorite” units as depicted in the cross
section. Rare earths mineralisation was also intercepted in the last 2m before the hole was lost at
666m down-hole, indicating that there appears to be no depth constraint to the Cummins Range
intrusive complex and rare earth mineralisation.
This hole has been processed and is on its way to the laboratory for assaying.
Figure 1 - CDX0020 Cross Section – Mineralisation extended down dip 250m
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
ASX Release: 25 May 2022
Figure 2 - Mineralised zone from 448.8m to 452.6m down-hole, with mineralised Monazite and Bastnasite in Carbonatite, confirmed with pXRF analysis
CDX0021 and CDX0022
Holes CDX0021 and CDX0022 were drilled on 80m step-outs along strike to the north-west and southeast respectively, both testing extensions to mineralisation defined in the 2021 drill program.
While both holes are still currently being logged and processed, initial indications show variable
mineralisation in both holes. Unfortunately, CDX0021 was lost before reaching the high-grade target
area and will be re-entered later. CDX0022 intersected mineralisation towards the bottom of the
hole.
Drilling is continuing with hole CDX0023 currently underway, water bore drilling ongoing and a
second diamond drill rig scheduled to arrive on 10 June.
RareX Managing Director, Jeremy Robinson, said: “We’ve made a great start to the 2022 program,
building on our success in 2021. The drilling completed to date has exceeded our expectations and
goes a long way to vindicating the Exploration Target we published earlier this year.
“Importantly, we have already demonstrated that the scale of the system at depth is enormous, with
the known dip extent of the mineralisation having effectively been doubled to 500m with hole
CDX0020. This hole also suggests that there is no depth constraint to the mineralisation, which means
that it could continue to grow with deeper drilling.
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
ASX Release: 25 May 2022
“We are looking forward to receiving ongoing drilling results and assays from this pivotal drilling
program, which we are confident will firmly establish Cummins Range as one of the largest new rare
earth development projects in Australia.”
Figure 3 - Cummins Range Vertical Long Projection - Mineralisation extended 250m down dip and 500m below surface
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
ASX Release: 25 May 2022
Figure 4 - Cummins Range Plan
Note: RareX has a Niton XRF on site that has been calibrated to Cummins Range mineralisation. The
XRF analyses for 43 elements including Cerium, Lanthanum, Praseodymium, Neodymium, yttrium,
Niobium and Phosphorus. The XRF is used as a tool to indicate whether a zone is mineralised,
however it is not an accurate indicator of grade. With the XRF results, rock type and visual
confirmation of mineralisation, the RareX geologist can assess whether an interval is mineralised.
This announcement has been authorised for release by the Board of RareX Limited.
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
ASX Release: 25 May 2022
ABOUT RAREX LIMITED – ASX: REE
RareX Limited (ASX: REE) is a Perth-based rare earths company committed to become the world’s
next producer of neodymium and praseodymium (NdPr).
NdPr is a core enabler of decarbonisation of our society and enables low carbon technologies,
especially in the electric mobility sector, robotics solutions and renewable energy, e.g. the wind
energy sector. NdPr is the key raw material for manufacturing rare earth powered permanent magnet
NdFeB electric motors, the heart of the next industrial revolution the Electrification of our Society.
RareX’s focus is on developing rare earths deposits in Australia, including the Cummins Range Rare
Earths Project in the East Kimberly region of Western Australia. RareX is committed to developing a
sustainable, ethical, transparent, secure a low carbon rare earth supply chain solution for the global
electric mobility market and NdFeB permanent motor downstream ecosystem.
For further information on the Company and its projects, visit www.rarex.com.au
Competent Person’s Statement
Information in this release that relates to Exploration Results is based on and fairly represents
information and supporting documentation reviewed or compiled by Mr Guy Moulang, an
experienced geologist engaged by RareX Limited. Mr Moulang is a Member of the Australian Institute
of Geoscientist and has sufficient experience which is relevant to the styles of mineralisation and
types of deposits under consideration and to the activities being undertaken to qualify as a
Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting of
Exploration Results, Mineral Resources and Ore Reserves”. Mr Moulang consents to the inclusion in
this release of the matters based on his information in the form and context in which it appears.
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
ASX Release: 25 May 2022
Appendix 1: Drill Collar Table
Hole ID
CRX0071
CRX0072
CRX0073
CDX0020
CDX0021
CDX0022
CDX0023
East
MGA
307080
307113
307023
306874
306893
307007
307008
RareX - ASX:REE
ABN: 65 105 578 756
North
MGA
7866743
7866776
7866747
7866530
7866640
7866508
7866383
RLUTM
393
393
393
393
393
393
393
End
Azimuth
Depth
50
144
50
96
50
138
50
666
50
345.2
50
470.6
50
198
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
Dip
Type
Status
60
60
60
60
60
60
60
RC
RC
RC
Diamond
Diamond
Diamond
Diamond
Being Processed
Being Processed
Being Processed
Mostly Processed
Being Processed
Being Processed
Hole in progress
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
ASX Release: 25 May 2022
Appendix 2: JORC Table
JORC Code, 2012 Edition – Table 1
Cummins Range Section 1 Sampling Techniques and Data
Criteria
JORC Code Explanation
Commentary
Sampling
techniques
Nature and quality of sampling (eg cut channels,
random chips, or specific specialised industry
standard measurement tools appropriate to the
minerals under investigation, such as down hole
gamma sondes, or handheld XRF instruments, etc).
These examples should not be taken as limiting the
broad meaning of sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of mineralisation that
are Material to the Public Report. In cases where
‘industry standard’ work has been done this would be
relatively simple (eg ‘reverse circulation drilling was
used to obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire assay’). In
other cases more explanation may be required, such
as where there is coarse gold that has inherent
sampling problems. Unusual commodities or
mineralisation types (eg submarine nodules) may
warrant disclosure of detailed information.
Drill type (eg core, reverse circulation, open- hole
hammer, rotary air blast, auger, Bangka, sonic, etc)
and details (eg core diameter, triple or standard tube,
depth of diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by what
method, etc).
Method of recording and assessing core and chip
sample recoveries and results assessed.
Measures taken to maximise sample recovery and
ensure representative nature of the samples.
Whether a relationship exists between sample
recovery and grade and whether sample bias may
have occurred due to preferential loss/gain of
fine/coarse material.
Whether core and chip samples have been
geologically and geotechnically logged to a level of
detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical studies.
•
Drilling
Techniques
Drill Sample
Recovery
Logging
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
•
•
•
•
•
•
•
•
•
•
•
•
The Cummins Range Rare Earth deposit is being
drilled tested with RC drilling and diamond drilling.
The RC drill rig used a 5 ½ inch diameter hammer.
Each 1m bulk sample was collected in a plastic bag.
Diamond drill sizes used are PQ, HQ and NQ2
Each metre was analysed with a portable XRF, and
recovery and geology logs were completed.
Sample interval selection was based on geological
controls and mineralisation
Each 1m RC bulk sample was split with a riffle
splitter to the appropriate size. Samples varied in
length from 1m to 4m.
Each core sample was cut in half with a brick saw.
The half core sample was sent to the laboratory
with intervals ranging from 0.3m to 1.3m.
Samples were assayed for 42 elements using either
a peroxide fusion with a ICP-OES and ICP-MS finish,
or a four acid digest with a ICP-OES and ICP-MS
finish
Prefix CRX drill holes are reverse circulation (RC)
drilling
Prefix CDX are diamond drilling. CDX0020 to
CDX0023 have RC precollars ranging from 150200m deep. Holes were then continued NQ2
diamond core
Recoveries for diamond drill holes were recorded
for each metre. Recoveries for diamond holes are
CDX0020 99%, CDX0021 99%, CDX0022 99%,
Recoveries for the RC drill holes are characterized
as good=>70%, Moderate=40-70%, Poor=<40%.
CDX0071=good, CDX0072=good, CDX0073=good
All metres drilled had a geology log completed.
Geology logs were aided using geochemical
analysis from a portable XRF.
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
ASX Release: 25 May 2022
Subsampling
techniques
and sample
preparation
Quality of
assay data
and
laboratory
tests
Verification
of sampling
and assaying
Location of
data points
Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc) photography.
The total length and percentage of the relevant
intersections logged.
If core, whether cut or sawn and whether quarter,
half or all core taken.
If non-core, whether riffled, tube sampled, rotary
split, etc and whether sampled wet or dry.
For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
Quality control procedures adopted for all subsampling stages to maximise representivity of
samples.
Measures taken to ensure that the sampling is
representative of the in situ material collected,
including for instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain
size of the material being sampled.
The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or total
For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining
the analysis including instrument make and model,
reading times, calibrations factors applied and their
derivation, etc.
Nature of quality control procedures adopted (eg
standards, blanks, duplicates, external laboratory
checks) and whether acceptable levels of accuracy (ie
lack of bias) and precision have been established.
The verification of significant intersections by either
independent or alternative company personnel.
The use of twinned holes.
The verification of significant intersections by either
independent or alternative company personnel.
Discuss any adjustment to assay data.
•
The detail of logging is appropriated for Mineral
Resource estimation.
•
Splits from the drill rig were not used. The entire
1m bulk sample was split with a riffle splitter to the
appropriate size. Samples varied in length from 1m
to 4m.
This RC sampling technique is better than industry
standards and is appropriate for this style of
mineralisation and for resource estimation.
Diamond core was cut in half with an automatic
core saw and sent to the laboratory. This is an
appropriate method for this style of mineralization
and for resource estimation.
Accuracy and quality of surveys used to locate drill
holes (collar and down-hole surveys), trenches, mine
workings and other locations used in Mineral
Resource estimation.
Specification of the grid system used.
•
•
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
•
•
•
•
No assay results have been released in this
announcement.
•
No assay results have been released in this
announcement.
Historic assay results are reported to RareX in parts
per million (ppm). RareX geological staff then
convert the parts per million to ppm oxides using
the below element to stoichiometric oxide
conversion factors. La2O3 1.1728, CeO2 1.2284,
Pr6O11 1.2082, Nd2O3 1.1664, Sm2O3 1.1596,
Eu2O3 1.1579, Gd2O3 1.1526, Dy2O3 1.1477,
Ho2O3 1.1455, Er2O3 1.1435, Tm2O3 1.1421,
Yb2O3 1.1387, Lu2O3 1.1371, Sc2O3 1.5338, Y2O3
1.2699, Nb2O5 1.4305, P2O5 2.2916
Drill hole collars were located by handheld GPS
All coordinates are in MGA Zone 52H 1994
•
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
ASX Release: 25 May 2022
•
Quality and adequacy of topographic control.
•
Data spacing
and
distribution
Orientation
of data in
relation to
geological
structure
Sample
security
Topographic control is maintained by the use of
previously surveyed drill holes. The Cummins
Range deposit is located on flat terrain.
Down hole surveys were taken every 30m, using a
digital Reflex multi shot camera.
The purposed of the drill program is to test for
primary mineralization. Drill lines are 80m apart
with 160m spaced drill hole. This is appropriate to
establish geological and grade continuity.
2m to 4m RC composites were completed in areas
where higher grades were not expected
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is
sufficient to establish the degree of geological and
grade continuity appropriate for the Mineral Resource
and Ore Reserve estimation procedure(s) and
classifications applied.
Whether sample compositing has been applied.
•
Whether the orientation of sampling achieves
unbiased sampling of possible structures and the
extent to which this is known, considering the deposit
type.
If the relationship between the drilling orientation
and the orientation of key mineralised structures is
considered to have introduced a sampling bias, this
should be assessed and reported if material.
The measures taken to ensure sample security
•
The angled drill holes were directed as best as
possible across the known geology.
•
Drill samples are delivered to Halls Creek by RareX
staff. Then the samples are transported from Halls
Creek to Perth via a reputable transport company.
•
Cummins Range Section 2 Reporting of Exploration Results
Criteria
JORC Code Explanation
Mineral
tenement and
land tenure
status
Type, reference name/number, location and
ownership including agreements or material issues
with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national park
and environmental settings.
The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a licence to operate in the area.
Acknowledgment and appraisal of exploration by
other parties.
Exploration
done by other
parties
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
•
The Cummins Range REO deposit is located on
tenement E80/5092 and is 100% owned by
Cummins Range Pty Ltd which is a wholly owned
subsidiary of RareX Ltd.
•
CRA Exploration defined REO mineralisation at
Cummins Range in 1978 using predominantly
aircore drilling. Navigator Resources progressed
this discovery with additional drilling after
purchasing the tenement in 2006. Navigator
announced a resource estimate in 2008. Kimberly
Rare Earths drilled additional holes and upgraded
the resource estimate in 2012.
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
ASX Release: 25 May 2022
Geology
Deposit type, geological setting and style of
mineralisation.
•
Drill hole
information
A summary of all information material to the
understanding of the exploration results including a
tabulation of the following information for all
Material drill holes:
•
easting and northing of the drill hole collar
•
•
Data
aggregation
methods
•
elevation or RL (Reduced Level – elevation
above sea level in metres) of the drill hole
collar
dip and azimuth of the hole
•
down hole length and interception depth
•
hole length.
If the exclusion of this information is justified on the
basis that the information is not Material and this
exclusion does not detract from the understanding of
the report, the Competent Person should clearly
explain why this is the case.
In reporting Exploration Results, weighting averaging
techniques, maximum and/or minimum grade
truncations (eg cutting of high grades) and cut-off
grades are usually Material and should be stated.
Where aggregate intercepts incorporate short
lengths of high grade results and longer lengths of
low grade results, the procedure used for such
aggregation should be stated and some typical
examples of such aggregations should be shown in
detail.
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
•
The Cummins Range REO deposit occurs within the
Cummins Range carbonatite complex which is a 2.0
km diameter near-vertical diatreme pipe that has
been deeply weathered but essentially outcropping
with only thin aeolian sand cover in places. The
diatreme pipe consists of various mafic to
ultramafic rocks with later carbonatite intrusions.
The primary ultramafic and carbonatite rocks host
low to high grade rare earth elements with back
ground levels of 1000-2000ppm TREO and high
grade zones up to 17% TREO. The current resource
sits primarily within the oxidised/weathered zone
which reaches to 120m below the surface.
Metallurgical studies by previous explorers and by
RareX show the rare earth elements are hosted by
Monazite and bastnasite which is a common and
favourable host for rare earth elements.
All drill hole locations are shown on the drill plan
and collar details are tabled within the
announcement
No results were reported in this announcement
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
ASX Release: 25 May 2022
Relationship
between
mineralisation
widths and
intercept
lengths
Diagrams
Balanced
reporting
Other
substantive
exploration
data
Further work
The assumptions used for any reporting of metal
equivalent values should be clearly stated.
These relationships are particularly important in the
reporting of Exploration Results
If the geometry of the mineralisation with respect to
the drill hole angle is known, its nature should be
reported.
If it is not known and only the down hole lengths are
reported, there should be a clear statement to this
effect (eg ‘down hole length, true width not known’).
Appropriate maps and sections (with scales) and
tabulations of intercepts should be included for any
significant discovery being reported These should
include, but not be limited to a plan view of drill hole
collar locations and appropriate sectional views.
Where comprehensive reporting of all Exploration
Results is not practicable, representative reporting of
both low and high grades and/or widths should be
practiced to avoid misleading reporting of
Exploration Results.
Other exploration data, if meaningful and material,
should be reported including (but not limited to):
geological observations; geophysical survey results;
geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk
density, groundwater, geotechnical and rock
characteristics; potential deleterious or
contaminating substances.
The nature and scale of planned further work (eg
tests for lateral extensions or large scale step out
drilling.
Diagrams clearly highlighting the areas of possible
extensions, including the main geological
interpretations and future drilling areas, provided
this information is not commercially sensitive.
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
•
•
The angled drill holes were directed as best as
possible across the known geology.
The true width of the intercepts in this
announcement are >80% of the down hole lengths
•
Sections, a drill hole plan and a vertical longitudinal
projection are with in the announcement.
•
Reporting is considered balanced
•
This announcement describes the first diamond
drill holes targeted at expanding the Cummins
Range resource. Cummins Range deposit has a
JORC compliant resource of 18.8Mt at 1.15% TREO
+ 0.14% Nb2O3. Metallurgical studies, water
monitoring bores and flora studies are currently
being conducted and a mining lease is under
application.
A further 14 000m to be drilling in 2022
Metallurgical tests are being conducted
Scoping studies are being conducted
•
•
•
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
Share your feedback
Discover