KCC: Porphyry system extended at Trundle Park
Released
Released
Announcement PDF
Porphyry system extended
at Trundle Park
•
• Most recent drill hole TRDD026 has intersected multiple broad intervals of porphyry style
intrusions at the Trundle Park prospect (assay results pending);
• TRDD026 is a follow-up scissor hole to TRDD022 (162m @ 0.24 g/t gold and 0.04% copper)
and has extended the porphyry system approximately 100m on strike and up to 115m down
dip;
• Alteration, host lithology, intrusive suite, depth and size of system typical of the multiple
intrusive porphyry deposits at the neighboring Northparkes mine;
• A wedge drilling off from previous hole TRDD014 (65.5m @ 0.25g/t gold and 0.04% copper)
has commenced, seeking to further extend and connect the intrusive systems returned in
both TRDD014 and TRDD022;
• The direction south from TRDD022 remains for future drill testing after the completion of
the wedge off TRDD014.
Melbourne, Australia — September 23rd, 2021
Kincora Copper Limited (the Company, Kincora) (TSXV & ASX:KCC) is pleased to provide an
exploration update from ongoing drilling at Trundle Park prospect situated at the brownfield
Trundle project, located in the Macquarie Arc of the Lachlan Fold Belt (LFB) in NSW, Australia.
John Holliday, Technical Committee chair, and Peter Leaman, VP of Exploration, noted:
“TRDD026 tested and better defined the NNW potential from TRDD022 intersecting
two zones of the targeted system, for which assay results are pending. While we have
not yet intersected the systems core we are seeing the encouraging right signs and are
deepening an adjacent hole (TRDD014W1).
TRDD014W1 seeks to test the target deeper below TRDD022 and to the SSE, and to
determine if the mineralization in TRDD022 (including 46m @ 0.54 g/t gold and
0.08% copper) and TRDD014 (including 10m @ 0.73g/t gold and 0.1% copper) are
related, and proximal to the potassic core of the system. Also, we are planning future
holes to test the open direction to the south of TRDD022 and TRDD014.”
Two rigs remain operational, one currently drilling a wedge off TRDD014 at the Trundle Park
prospect at Trundle, and the other has commenced a fourth hole at the Gateway prospect at the
Fairholme project.
Trundle and Fairholme are both advanced exploration stage projects with hallmarks of
neighbouring deposits, Northparkes and Cowal respectively, with assay results from recent
drilling pending.
www.kincoracopper.com
enquiries@kincoracopper.com
Figure 1: Kincora is currently drilling the Trundle and Fairholme projects
• Favourable locations of the key porphyry belts of the Macquarie Arc
• Demonstrate potential hallmarks of neighbouring world-class deposits
MACQUARIE ARC
JUNEE-NARROMINE
VOLCANIC BELT
MOLONG VOLCANIC
BELT
KINCORA’S
PROJECTS
Figure 2: Trundle is the only brownfield porphyry project held by a listed junior in the
Lachlan Fold Belt (LFB), located within Northparkes Igneous Complex which already
hosts the 2nd largest porphyry mine in Australia (endowment 5.5Moz Au & 4.5Mt Cu1)
•
•
Large geochemical footprints with a cluster of concealed intrusive deposits at Northparkes
Section of E48 alteration and mineralisation provided in Figure 4
1 Bespoke March 2020 report by Richard Schodde, MinEx Consulting, for Kincora
www.kincoracopper.com
enquiries@kincoracopper.com
Trundle Park prospect
Recent drilling of hole TRDD022 by Kincora observed significant broad mineralized intervals
comprising 162m @ 0.25 g/t gold, 0.04% copper and 9 ppm molybdenum (from 670m),
including 46m @ 0.54 g/t gold and 0.08% copper (from 684m) and 18m @ 0.75 g/t gold and
0.09% copper (from 712m) (announced August 16th, 2021: “Significant gold bearing intervals
at Trundle Park”). The results of TRDD022 revealed a large previously untested zone at depth,
open in all directions. It provided the greatest ‘proof of concept’ support to date for Trundle
Park to host a porphyry intrusive system, potentially with ore grades.
Detailed geological logging and petrographic analysis of TRDD022 has noted that the bettermineralized zones are in brecciated areas, with strongly developed and variable interpreted
outer potassic alteration. These better-mineralized zones exhibit generally centimetre-scale
interpreted fingers of monzonite vein-dyke and associated mineralization intruding a
monzodiorite intrusion.
TRDD026, the initial diamond drill ‘scissor’ hole to follow up TRDD022, sought to test the
potential for higher-grade gold-copper and along strike approximately 100m NNW from the
mineralization zone in TRDD022. TRDD026 has intersected multiple intrusive phases
providing further confirmation of, and extension to, the targeted porphyry system.
Figure 3: TRDD022 and TRDD026 provide convincing and increasing evidence of a
multiple phase, multiple intrusive system with demonstrated mineral tenor with
analogous lithology and alteration to the targeted intrusive porphyry systems that occur
elsewhere in the wider and immediate region (at Cadia and Northparkes respectively)
(a) Working Leapfrog model – Trundle Park prospect section
TRDD0261
DRILL HOLE KEY
Collar
>0.5 CuEq
0.1-0.5 CuEq
TRDD014W12
Potassic Alteration
TRDD022
1Assay results for TRDD026
2 Design of
on-going hole
www.kincoracopper.com
pending
GEOLOGY MODEL
Sericite Alteration
200m
Skarn Alteration
enquiries@kincoracopper.com
(b) Insert with significant mineralised intervals and illustration of strike/down dip target of TRDD014W1
TRDD008
162m @ 0.25 g/t Au & 0.04% Cu from 670m incl:
• 46m @ 0.54 g/t Au & 0.08% Cu from 684m; &,
• 18m @ 0.75 g/t Au & 0.09% Cu from 712m
44m @ 0.20g/t Au & 0.14% Cu from 358m incl:
• 7m @ 0.64g/t Au, 0.53% Cu from 385m
TRDD001
TRDD0261
19m @ 0.43g/t Au, 0.21% Cu from 388m incl:
• 4m @ 0.94g/t Au, 0.57% Cu from 394m
22m @ 0.23g/t Au, 0.07% Cu from 482m incl:
• 1.3m @ 2.34g/t Au, 0.54% Cu from 486m
65.5m @ 0.25g/t Au, 0.04% Cu from 600m incl:
• 10m @ 0.73g/t Au, 0.1% Cu from 626m
DRILL HOLE KEY
Collar
>0.5 CuEq
0.1-0.5 CuEq
TRDD014
TRDD014W12
GEOLOGY MODEL
Monzonite
Monzodiorite
Sericite Alteration
1 Assay results for TRDD026 pending
100m
Skarn Alteration
2 Design of on-going hole
(c) Plan view of the Trundle Park prospect
DRILL HOLES
Kincora drilled
Planned/ongoing
Historic
Informal workings
Potassic alteration
TRDD026
Proximal skarn
TRDD007
Monzonite
TRDD022
TRDD001
TRDD004
TRDD008
TRDD014W1
200m
www.kincoracopper.com
Zinc halo
(>100m surface,
>100ppm)
DEPTH SLICE 250M
BELOW SURFACE
(WITH HISTOGRAM)
Gold (>0.1g/t)
Copper (>500ppm)
Magnetic inversion
enquiries@kincoracopper.com
TRDD026 intersected the targeted monzonite intrusion in two zones:
1. Within a footwall to a westerly dipping fault where quartz-monzonite with strong
sericite alteration and quartz-carbonate veining, and breccia fill was observed (711m to
749m down hole). This interval is visually interpreted to be similar in mineral
composition to the quartz-monzonite observed in TRDD022 (670m to 730m down hole)
which is potassic altered and along strike towards the south in relation to TRDD026 (see
Figure 5 (b)). The intersection of the approximately 40m estimated near true width of
the targeted lithological unit (quartz-monzonite) is encouraging.
2. A multiphase felsic intrusion sequence was then intersected from 746m to 826.9m,
interpreted to be representative of the true width of this unit of the system (eg
approximately 80m). This zone is dominated by monzodiorite, with interpreted later
intrusions of minor quartz monzonite exhibiting patchy potassic alteration and also
quartz monzodiorite with chlorite-silica alteration.
The potassic altered quartz monzonite, with chalcopyrite mineralization (see Figure
5(d)), in TRDD026 at 750m down hole depth appears similar to and is interpreted to be
related to the potassic altered quartz monzonite in hole TRDD022 at 715m depth
containing elevated gold and copper. Importantly, this interpretation supports potassic
alteration occurring approximately 100m along strike and to the north of TRDD022.
See Figure 5 for examples of rock types in TRDD026 and interpreted equivalent units to
TRDD022 with Figures 3 and 4 illustrating the current intrusive model and interpretation at
the Trundle Park prospect.
The multiple phase, multiple intrusive setting returned in TRDD022 and TRDD026, coupled
with returned mineral tenor in TRDD022 provides indicators of a proximal environment to the
targeted core of an intrusive porphyry system. The multiple intrusive deposits at the
neighbouring Northparkes mine and at Cadia-Ridgeway exhibit such a setting around discrete
mineralized cores of only hundreds of metres width that are vertically extensive and occur in
clusters or a series of deposits. See Figure 4 for an example of the working alteration and
geological model of the Trundle Park prospect relative to the E48 deposit at Northparkes.
A wedge drilling off the previous hole TRDD014 has commenced. This hole TRDD014W1 is
seeking to test the vertical extent of the main mineralized zone in TRDD022 (46m @ 0.54 g/t
gold and 0.08% copper) down dip and on strike to the SSE, and horizontally to the NNW from
TRDD014 (10m @ 0.73g/t gold and 0.1% copper). Importantly, TRDD014W1 seeks to
determine the potential for the mineralization in these two holes to be related, and proximal to
the potassic core of the currently defined intrusive system.
www.kincoracopper.com
enquiries@kincoracopper.com
Figure 4: Interpreted structurally controlled sericitic overprinting alteration phase
intersected in TRDD026 adjacent to potassic alteration in TRDD022 supports a further
potential mineralising event within the porphyry system at Trundle Park
• Pervasive fault/fracture controlled sericitic alteration often occurs in the centre of
Northparkes/Goonumbla district mineralised systems and extends to depth
E48 at Northparkes alteration and mineralization 1
Trundle Park – working model of alteration and mineralization
Grade shells
0.5% copper
0.2g/t gold
TRDD026 drilled
NNW ~100m off
section
Alteration zones
Skarn
Post mineral cover
TRDD014E targeted
SSE ~60m forward
of section
Sodic
Outer propylitic
TRDD022 162m @
0.24g/t Au, 0.04% Cu
Inner propylitic
Potassic
46m @ 0.54g/t
Au, 0.08% Cu
Sericite
Fault
Quartz monzonite
porphyry
Volcanics
0
200m
Granite Pluton
18m @ 0.75g/t
Au, 0.09% Cu
0
200m
Volcanics
1 Pacey A 2016 “The characteristics, geochemistry & origin of propylitic alteration in the Northparkes
porphyry Cu-Au system”
While sericitic alteration in the traditional porphyry model is generally associated to be located in a
higher level in the system, deep-level sericite alteration often occurs overprinting or adjacent to the core
of the E48, E26, E27 and E22 porphyry deposits and E44 skarn deposit at the neighbouring Northparkes
system.
www.kincoracopper.com
enquiries@kincoracopper.com
Figure 5: Examples of the rock types and multiple intrusive phases in holes TRDD022 and
TRDD026 at the Trundle Park prospect
(a) Monzodiorite and quartz monzodiorite intrusions
Quartz monzodiorite
Monzodiorite
quartz eyes
TRDD022 643.60m
Quartz monzodiorite
TRDD026 762.65m
Monzodiorite
Top:
Medium grained equi-granular monzodiorite (light red) cut by quartz-monzodiorite (dark red) from hole TRDD022 (at
643.6m downhole).
Bottom: Medium grained equi-granular monzodiorite (light grey) crosscut by quartz monzodiorite (dark grey) from TRDD026 (at
762.65m downhole).
(b) Quartz monzonite intrusions
Quartz monzonite – potassic alteration
TRDD022 713.7m
Quartz monzonite – sericite alteration
TRDD026 724.5m
Top:
Medium grained equi-granular monzodiorite (light red) cut by potassic altered quartz monzodiorite (dark red) from
TRDD022 (at 713.7m downhole).
Bottom: Medium grained quartz-monzonite (tan-lime) with strong sericite alteration and quartz-carbonate veining from hole
TRDD026 (at 724.5m downhole).
www.kincoracopper.com
enquiries@kincoracopper.com
(c) Skarn alteration
TRDD022 802.9m
Skarn altered volcaniclastic breccia crosscut by late carbonate veinlets
TRDD026 739m
Skarn altered mega crystal andesite crosscut by monzodiorite dyke
Top:
Skarn alteration, strong chlorite-garnet-epidote altered volcaniclastic breccia crosscut by late carbonate veinlets from
TRDD022 (at 802.9m downhole).
Bottom: Mega crystal andesite with strong magnetite-chlorite-hematite alteration cut by carbonate-quartz-chalcopyrite veins
(LHS), in turn crosscut by medium grey monzodiorite (RHS) from TRDD062 (at 739m downhole).
(d) SSE margin of quartz monzonite intrusions
Quartz-monzonite with veining
TRDD022 710.6m
Quartz-monzonite with veining
TRDD026 750m
Top:
Potassic altered quartz-monzonite (dark red), cutting quartz-monzodiorite (dark grey), in a mineralised interval with: 2m
@ 0.42g/t gold, 0.11% copper and 7ppm molybdenum from hole TRDD022 (at 710.6m downhole).
Bottom: Interpreted strongly potassic (red) altered quartz monzonite cross cut by carbonate-chlorite-chalcopyrite veinlets from
TRDD026 (at 750m downhole).
Photos of selected intervals which are not representative of the mineralization hosted on the whole property or
Trundle Park prospect but are of the alteration and lithology’s intersected in the mineralized zones in these
sections of drill holes TRDD022 and TRDD026, and current working geological interpretation presented in
Figure 3. There is insufficient drilling data to date to demonstrate continuity of mineralized domains and
determine the relationship between mineralization widths and intercept lengths, true widths are not known.
www.kincoracopper.com
enquiries@kincoracopper.com
Trundle Project background
The Trundle Project includes one single license covering 167km2 and was secured by Kincora in the March 2020 agreement with
RareX Limited (“REE” on the ASX). Kincora is the operator, holds a 65% interest in the Trundle Project and is the sole funder until
a positive scoping study is delivered at which time a fund or dilute joint venture will be formed.
This announcement has been authorised for release by the Board of Kincora Copper Ltd (ARBN 645 457 763)
For further information please contact:
Sam Spring, President and Chief Executive Officer
sam.spring@kincoracopper.com or +61431 329 345
For media enquiries:
Media & Capital Partners
Angela East at Angela.East@mcpartners.com.au
Executive and registeraed office
Subsidiary office Australia
400 – 837 West Hastings Street
Leydin Freyer Corp Pty Ltd
Vancouver, BC V6C 3N6, Canada
Level 4, 100 Albert Road
Tel: 1.604.283.1722
South Melbourne, Victoria 3205
Fax: 1.888.241.5996
Forward-Looking Statements
Certain information regarding Kincora contained herein may constitute forward-looking statements within the meaning of
applicable securities laws. Forward-looking statements may include estimates, plans, expectations, opinions, forecasts, projections,
guidance or other statements that are not statements of fact. Although Kincora believes that the expectations reflected in such
forward-looking statements are reasonable, it can give no assurance that such expectations will prove to have been correct. Kincora
cautions that actual performance will be affected by a number of factors, most of which are beyond its control, and that future
events and results may vary substantially from what Kincora currently foresees. Factors that could cause actual results to differ
materially from those in forward-looking statements include market prices, exploitation and exploration results, continued
availability of capital and financing and general economic, market or business conditions. The forward-looking statements are
expressly qualified in their entirety by this cautionary statement. The information contained herein is stated as of the current date
and is subject to change after that date. Kincora does not assume the obligation to revise or update these forward-looking
statements, except as may be required under applicable securities laws.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of
the TSX Venture Exchange) or the Australian Securities Exchange accepts responsibility for the adequacy or
accuracy of this release.
www.kincoracopper.com
enquiries@kincoracopper.com
Table 1: Trundle project - Collar Information
Length (m)
Dip (°)
Azimuth (°)
RL
Easting
(MGA)
Northing
(MGA)
Core
recovery
Assay
results
Press
release
TRDD001
685
60
262
270
570049
6352082
95.90%
Yes
1
TRDD002
790
60
101
271
568443
6360363
98.20%
Yes
2
Bayleys
TRDD003
721
60
329
274
569230
6360641
99.50%
Yes
3
Trundle Park
TRDD004
694
55
264
271
569780
6352079
99.60%
Yes
3
Mordialloc
TRDD005
958
60
110
266
568439
6360204
97.30%
Yes
3
Mordialloc
TRDD006
962
70
275
267
568599
6360206
98.90%
Yes
4
Trundle Park
TRDD007
521
60
264
268
570012
6352230
84.40%
Yes
6,7
Trundle Park
TRDD008
490
60
264
272
569920
6351962
97.10%
Yes
4,5
Trundle Park
TRDD009
445
60
310
267
569611
6352378
99.20%
Yes
6
Trundle Park
TRDD010
643
60
330
272
569963
6351919
96.40%
Yes
6
Trundle Park
TRDD011
332
55
330
270
570035
6352041
94.80%
Yes
5
Trundle Park
TRDD012
581
55
330
270
570062
6351997
85.60%
Yes
5
Trundle Park
TRDD013
402
60
330
272
570012
6351827
94.60%
Yes
6
Trundle Park
TRDD014
670
65
330
275
569833
6351808
97.40%
Yes
7
Trundle Park
TRDD015
550
60
330
270
570088
6351952
98.10%
Yes
7
Trundle Park
TRDD016
496
60
330
268
570029
6352250
89.40%
Yes
7
Trundle Park
TRDD017
691
55
150
272
569684
6352060
98.73%
Yes
8
Trundle Park
TRDD018
484
55
330
268
570136
6352352
97.40%
Yes
8
Mordialloc
TRDD019
943
75
320
262
568697
6360065
100.0%
Yes
8
Mordialloc
TRDD020
718
60
140
273
568227
6360865
99.80%
Yes
8
Mordialloc
TRDD021
736
60
140
274
568419
6360647
99.21%
Yes
9
Trundle Park
TRDD022
940
55
274
269
570073
6352099
88.07%
Yes
9
Trundle Park
TRDD023
307
60
320
269
570085
6352076
91.30%
Mordialloc NE
TRDD024
571
70
280
285
569846
6361939
96.65%
Mordialloc SW
TRDD025
397
60
70
259
567718
6359613
94.95%
Trundle Park
TRDD026
843
60
85
271
569305
6352232
98.30%
Trundle Park
TRDD014W1
ongoing
55
338
275
569833
6351808
Target
Hole#
Trundle Park
Mordialloc
Metres drilled
16,570
For further details, including QAQC procedures, please refer to the following press releases:
1.
July 6, 2020 - Kincora announces high-grade gold-copper results from first hole at Trundle
2.
July 23, 2020 - Kincora reports further strong encouragement at Trundle
3.
September 3, 2020 - Kincora provides update on expanded drilling program at Trundle
4.
November 30, 2020 - Kincora intersects broad mineralized zones at Trundle
5.
January 20, 2021 - Kincora intersects further shallow mineralization at Trundle
6.
March 2021 - Independent Technical Report for the ASX prospectus
7.
April 22, 2021 - Exploration Update
8.
July 8, 2021 - Exploration portfolio drilling update
9.
August 17 2021 - Significant gold-bearing intervals at Trundle Park
www.kincoracopper.com
enquiries@kincoracopper.com
Drilling, Assaying, Logging and QA/QC Procedures
Sampling and QA/QC procedures are carried out by Kincora Copper Limited, and its contractors, using the Company’s protocols as
per industry best practise.
All samples have been assayed at ALS Minerals Laboratories, delivered to Orange, NSW, Australia. In addition to internal checks by
ALS, the Company incorporates a QA/QC sample protocol utilizing prepared standards and blanks for 5% of all assayed samples.
Diamond drilling was undertaken by DrillIt Consulting Pty Ltd, from Parkes, under the supervision of our field geologists. All drill
core was logged to best industry standard by well-trained geologists and Kincora’s drill core sampling protocol consisted a
collection of samples over all of the logged core.
Sample interval selection was based on geological controls or mineralization or metre intervals, and/or guidance from the Technical
Committee provided subsequent to daily drill and logging reports. Sample intervals are cut by the Company and delivered by the
Company direct to ALS.
All reported assay results are performed by ALS and widths reported are drill core lengths. There is insufficient drilling data to date
to demonstrate continuity of mineralized domains and determine the relationship between mineralization widths and intercept
lengths.
True widths are not known at this stage.
Significant mineralised intervals for drilling at the Trundle project are reported based upon two different cut off grade criteria:
•
Interpreted near surface skarn gold and copper intercepts are calculated using a lower cut of 0.20g/t and 0.10%
respectively; and,
•
Porphyry intrusion system gold and copper intercepts are calculated using a lower cut of 0.10g/t and 0.05% respectively.
Significant mineralised intervals are reported with dilution on the basis of:
•
Internal dilution is below the aforementioned respective cut off’s; and,
•
Dilutions related with core loss as flagged by a “*”.
The following assay techniques have been adopted for drilling at the Trundle project:
o
o
o
o
Gold: Au-AA24 (Fire assay), reported.
Multiple elements: ME-ICP61 (4 acid digestion with ICP-AES analysis for 33 elements) and ME-MS61 (4 acid digestion
with ICP-AES & ICP-MS analysis for 48 elements), the latter report for TRDD001 and former reported for holes
TRDD002-TRDD022.
Copper oxides and selected intervals with native copper: ME-ICP44 (Aqua regia digestion with ICP-AES analysis) has
been assayed, but not reported.
Assay results >10g/t gold and/or 1% copper are re-assayed.
Qualified Person
The scientific and technical information in this news release was prepared in accordance with the standards of the Canadian
Institute of Mining, Metallurgy and Petroleum and National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI
43-101”) and was reviewed, verified and compiled by Kincora’s geological staff under the supervision of Paul Cromie (BSc Hons.
M.Sc. Economic Geology, PhD, member of the Australian Institute of Mining and Metallurgy and Society of Economic Geologists),
Exploration Manager Australia, who is the Qualified Persons for the purpose of NI 43-101.
JORC Competent Person Statement
Information in this report that relates to Exploration Results, Mineral Resources or Ore Reserves has been reviewed and approved
by Mr. Paul Cromie, a Qualified Person under the definition established by JORC and have sufficient experience which is relevant
to the style of mineralization and type of deposit under consideration and to the activity being undertaking to qualify as a
Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves’.
Paul Cromie (BSc Hons. M.Sc. Economic Geology, PhD, member of the Australian Institute of Mining and Metallurgy and Society
of Economic Geologists), is Exploration Manager Australia for the Company.
Mr. Paul Cromie consents to the inclusion in this report of the matters based on his information in the form and context in which it
appears.
The review and verification process for the information disclosed herein for the Trundle, Fairholme and Nyngan projects have
included the receipt of all material exploration data, results and sampling procedures of previous operators and review of such
information by Kincora’s geological staff using standard verification procedures.
www.kincoracopper.com
enquiries@kincoracopper.com
JORC TABLE 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections).
Criteria
Sampling
techniques
JORC Code explanation
•
•
•
•
Drilling
techniques
Drill sample
recovery
•
•
•
•
Commentary
Nature and quality of sampling (e.g.
cut channels, random chips, or
specific specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or
handheld XRF instruments, etc.).
These examples should not be taken as
limiting the broad meaning of
sampling.
Include reference to measures taken
to ensure sample representivity and
the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of
mineralisation that are Material to
the Public Report.
In cases where ‘industry standard’
work has been done this would be
relatively simple (e.g. ‘reverse
circulation drilling was used to obtain
1 m samples from which 3 kg was
pulverised to produce a 30 g charge
for fire assay’). In other cases more
explanation may be required, such as
where there is coarse gold that has
inherent sampling problems. Unusual
commodities or mineralisation types
(eg submarine nodules) may warrant
disclosure of detailed information
•
Drill type (e.g. core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic, etc) and details (e.g. core
diameter, triple or standard tube,
depth of diamond tails, face-sampling
bit or other type, whether core is
oriented and if so, by what method,
etc.).
•
Method of recording and assessing
core and chip sample recoveries and
results assessed.
Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
Whether a relationship exists between
sample recovery and grade and
whether sample bias may have
occurred due to preferential loss/gain
of fine/coarse material.
•
•
•
•
•
•
•
•
•
•
•
•
•
Logging
•
•
www.kincoracopper.com
Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
Whether logging is qualitative or
quantitative in nature. Core (or
•
•
Kincora Copper Limited is the operator of the
Trundle Project, with drilling using diamond coring
methods by DrillIt Consulting Pty Ltd, from which
sub-samples were taken over 2 m intervals and
pulverised to produce suitable aliquots for fire assay
and ICP-MS.
Diamond drilling was used to obtain orientated
samples from the ground, which was then
structurally, geotechnically and geologically logged.
Sample interval selection was based on geological
controls and mineralization.
Sampling was completed to industry standards with
1⁄4 core for PQ and HQ diameter diamond core and
1⁄2 core for NQ diameter diamond core sent to the
lab for each sample interval.
Samples were assayed via the following methods:
- Gold: Au-AA24 (Fire assay)
- Multiple elements: ME-ICP61 (4 acid digestion
with ICP-AES analysis for 33 elements) and MEMS61 (4 acid digestion with ICP-AES & ICP-MS
analysis for 48 elements)
- Copper oxides and selected intervals with native
copper: ME-ICP44 (Aqua regia digestion with ICPAES analysis) has been assayed, but not reported
- Assay results >10g/t gold and/or 1% copper are
re-assayed
Historic sampling on other projects included soils,
rock chips and drilling (aircore, RAB, RC and
diamond core).
Drilling by Kincora at Trundle used diamond core
drilling with PQ, HQ and NQ diameter core
depending on drilling depth.
All Kincora core was oriented using a Reflex ACE
electronic tool.
Historic drilling on Kincora projects used a variety
of methods including aircore, rotary air blast,
reverse circulation, and diamond core. Methods are
clearly stated in the body of the previous reports
with any historic exploration results.
Drill Core recovery was logged.
Diamond drill core recoveries are contained in the
body of the announcement.
Core recoveries were recorded by measuring the
total length of recovered core expressed as a
proportion of the drilled run length.
Core recoveries for most of Kincora’s drilling were
in average over 97%, with two holes averaging 85%
Poor recovery zones are generally associated with
later fault zones and the upper oxidised parts of
drill holes.
There is no relationship between core recoveries
and grades.
All Kincora holes are geologically logged for their
entire length including lithology, alteration,
mineralisation (sulphides and oxides), veining and
structure.
Logging is mostly qualitative in nature, with some
visual estimation of mineral proportions that is
semi-quantitative. Measurements are taken on
structures where core is orientated.
enquiries@kincoracopper.com
•
Subsampling
techniques
and sample
preparation
•
•
•
•
•
•
Quality of
assay data
and
laboratory
tests
•
•
•
Verification
of sampling
and assaying
•
•
•
•
costean, channel, etc.) photography.
The total length and percentage of the
relevant intersections logged.
•
•
All core is photographed.
Historic drilling was logged with logging mostly
recorded on paper in reports lodged with the NSW
Department of Mines.
If core, whether cut or sawn and
whether quarter, half or all core
taken.
If non-core, whether riffled, tube
sampled, rotary split, etc. and
whether sampled wet or dry.
For all sample types, the nature,
quality and appropriateness of the
sample preparation technique.
Quality control procedures adopted
for all sub-sampling stages to
maximise representivity of samples.
Measures taken to ensure that the
sampling is representative of the in
situ material collected, including for
instance results for field
duplicate/second-half sampling.
Whether sample sizes are appropriate
to the grain size of the material being
sampled.
•
Once all geological information was extracted from
the drill core, the sample intervals were cut with an
Almonte automatic core saw, bagged and delivered
to the laboratory.
This is an appropriate sampling technique for this
style of mineralization and is the industry standard
for sampling of diamond drill core.
PQ and HQ sub-samples were quarter core and NQ
half core.
Sample sizes are considered appropriate for the
disseminated, generally fine-grained nature of
mineralisation being sampled.
Duplicate sampling on some native copper bearing
intervals in TRDD001 was undertaken
Share your feedback
Discover