KCC: Further confirmation of new discovery at Trundle Park
Released
Released
Announcement PDF
Further confirmation of
new discovery and broad
intervals at Trundle Park
• Full assay results confirms hole TRDD029 as an important new geological discovery
along the southern extension zone at Trundle Park:
o Cumulative gold and copper mineralisation across 196m returned in three
skarn zones in TRDD029, including:
•
Upper Skarn: 36m @ 0.68 g/t gold and 0.29% copper1
•
Middle Skarn: 129m @ 0.17 gold and 0.12% copper, including:
o 34m @ 0.38g/t gold and 0.30% copper
• Assay results for TRDD030, that intersected cumulative skarn of ~250m, along with
quartz-carbonate-chalcopyrite vein sets in the Middle Skarn, expected in 3 weeks
• Most recent hole TRDD031 has intersected cumulative skarn of >100m, below potassic
alteration within quartz veining comprising tourmaline-bornite-chalcopyrite in volcanics
Hole TRDD029
Hole TRDD0311
Hole TRDD030 1
Hole TRDD0322
GEOLOGY MODEL
Skarn
Limestone
Volcaniclastic
Upper skarn
Quartz-carbonatechalcopyrite vein set
Middle skarn
Quartz-tourmalinebornite-chalcopyrite vein
Off-section trace
1 Assay results pending
2 Trace of designed & commenced
hole
See body of release for further technical details and assumptions, incl.
Figure 2 for plan view & wider sections, including footnotes
TRDD029
Upper Skarn
Middle Skarn
including
incl.
Lower Skarn
Lower Skarn
Interval (m)
36
139
34
7
13
8
196
Au (g/t)
0.68
0.17
0.38
0.66
0.13
0.11
0.26
Cu (%)
0.29
0.12
0.30
0.39
0.07
0.01
0.14
From (m)
732
828
931
942
981
1004
1
• Tabular, bedded, mineralised skarn system across three zones confirmed over
>240m strike (and open), with estimated true width of up to 120m
• Skarn mineralization and quartz sulphide veining in overlying volcanics from holes
TRDD029, TRDD030 and TRDD031 provide important geological and mineral
vectors for the targeted causative intrusive porphyry source
• Hole TRDD032 commenced following up these vectors which are coincident with a wider
north-south mineralised corridor and magnetic low
• Air-core drilling program of 50 holes for 1,550 metres complete, testing the
wider intrusive complex and extent of identified anomalous copper-gold
mineralisation at open pit target depths to the north of Trundle Park
Melbourne, Australia — March 15th, 2022
Kincora Copper Limited (the Company, Kincora) (TSXV & ASX:KCC) is very pleased to provide
an exploration update from ongoing drilling at Trundle Park prospect situated at the brownfield
Trundle project, located in the Macquarie Arc of the Lachlan Fold Belt (LFB) in NSW, Australia.
John Holliday, Technical Committee chair, and Peter Leaman, VP of Exploration, noted:
“Full assay results for TRDD029 confirm a new geological discovery in the southern
extension zone at Trundle Park, with two encouraging broad intervals of higher gold
and copper tenor in skarn beds typical of Macquarie Arc porphyry copper-gold
systems.
Also, most recent hole TRDD031 has added to our understanding of this southern
extension zone. We have now intersected a tabular, bedded, mineralised skarn system
across a strike of over 240m with Upper, Middle and Lower skarns in three holes.
Widths, alteration and visual mineralisation of these skarn zones are providing
vectors for follow up drilling.
These results are very encouraging that we are lateral to and near the margin of the
primary target, the ore discovery we are after, which is a higher-grade, large
porphyry deposit.
As we await assay results for TRDD030 and 31 we continue to systematically explore
out from this new southern extension discovery zone, which remains open in all
directions. Hole TRDD032, a 150m step-out to the south-east is in progress.”
Ahead of the upcoming 121 Mining Investments APAC online conference an updated corporate
presentation, including further details on the Trundle project and recent drill results, is
available at www.kincoracopper.com
Figure 1: Section and working interpretation of the Trundle Park southern extension zone
LHS: Cross section of a tabular, bedded mineralised skarn system confirmed across three zones over a >250m strike (and open in all directions) and quartz sulphide veining in
holes TRDD029, TRDD030 and TRDD031 at Trundle Park. Hole TRDD032 in progress stepping out 150m to the SE following up coincident vectors.
RHS: Conceptual and illustrative setting of the Trundle Park southern extension zone relative to the Macquarie Arc porphyry model with a targeted causative intrusive porphyry
source being at a lateral setting (similar to the Big Cadia skarn to Cadia Quarry).
TRUNDLE PARK: SOUTHERN EXTENSION DISCOVERY ZONE
Hole TRDD029
Hole TRDD031 1
Hole TRDD030 1
MACQUARIE ARC PORPHYRY MODEL: CONCEPTUAL
TRUNDLE PARK SOUTHERN EXTENSION ZONE SETTING
Hole TRDD032 2
Epithermal Zone
Epithermal, quartzcarbonate-base
metal-gold zones
Cadia East
Little Cadia
Skarn zones
Upper skarn
Trundle
Park
southern
extension
zone
Middle skarn
Lower skarn
Skarn
Limestone
Open
>240m
Open + Vectors
Mineralised Skarn zones (see Table 1 for further details)
1 Assay results pending (visual lithology)
2 Designed & on-going hole TRDD032
Volcaniclastic
Quartz-carbonatechalcopyrite vein set
Quartz-tourmalinebornite-chalcopyrite vein
Big Cadia
Alkalic Porphyry Model –
Macquarie Arc example
(adopted from Alan J.
Wilson, Ph.D. 2003)
Ridgeway
Cadia Far East
Northparkes:
E26, E48, E22,
E27
Porphyry zones
Cadia Hill,
Cadia Quarry
Northparkes:
E31, GRP314
Mineralised porphyry
Distal skarn
Lithocap
Calc-potassic
Off-section trace
Pre-mineral QMP
Breccia
Sericite-Quartz
Section thickness 450m
(dashed trace >450m)
Monzonite
Limestone
Volcaniclastic sandstone
Porphyry vein
Sodic-calcic
Proximal skarn
Volcaniclastic rock
Epithermal vein
Orthoclase-Albite
Assay results for drill hole TRDD029 and visuals of TRDD031
Full assay results for hole TRDD029 confirm an important new geological discovery with the
southern extension zone at the Trundle Park prospect. Gold and copper mineralisation was
returned across a total of 196m covering three separate tabular skarn zones, including higher
gold and copper tenure in the Upper and Middle Skarn zones. This is very encouraging and
significant in the context of the Macquarie Arc. Assay results are included in Tables 1 and 2.
Table 1: Trundle Park target hole TRDD029 – Summary of skarn zone intervals
TRDD029
Upper Skarn
Middle Skarn
including
incl.
Lower Skarn
Lower Skarn
Interval (m)
36
139
34
7
13
8
196
Au (g/t)
0.68
0.17
0.38
0.66
0.13
0.11
0.26
Cu (%)
0.29
0.12
0.30
0.39
0.07
0.01
0.14
From (m)
732
828
931
942
981
1004
1
1 Previously reported, January 24th, 2022, “Newly Discovered Higher-Grade Zones Expand the Large-Scale Gold-Copper
System at Trundle Park”
Full summary of significant mineralised intervals from TRDD029 available in Table 2
Most recent hole TRDD031 has intersected the three skarns zones; the Upper, Middle and
Lower, as did TRDD029 and TRDD030, with a cumulative mineralised interval across these
skarn zones of over 100m. The three holes to date in the southern extension zone have
confirmed a tabular, bedded, multiple zone mineralised skarn system confirmed across over
240m strike with estimated true width of up to 120m (the Middle Skarn in TRDD030). The
southern extension zone remains open in all directions.
Hole TRDD030 intersected cumulative skarns of over 250m, with quartz-carbonatechalcopyrite vein sets in the Middle Skarn with assay results expected in 3 weeks.
Similar to previous holes TRDD029 and TRDD030, there is representation of copper sulphides
associated with prograde skarn development in hole TRDD031. These are generally
characterised by garnet-magnetite-pyrite-chalcopyrite, mainly within the Middle Skarn and
also present to a lesser extent in the Upper Skarn zone (the latter which appears to have
pinched out in hole TRDD031).
The width, alteration and visual mineralisation of the respective three skarn zones from hole
TRDD029, TRDD030 and TRDD031 are providing insights to the interpreted fluid pathways
from the primary source, and targeted causative porphyry intrusion.
While TRDD031 didn’t intersect the anticipated quartz-carbonate-chalcopyrite vein sets that
holes TRDD029 and TRDD030 did, it returned the first indications of tourmaline occurring
along quartz veinlets along with blebs of bornite and/or chalcopyrite, and from a relatively
shallow depth (first noted at 285m down hole). This zone was hosted in silica-magnetite altered
pebbly volcanoclastic rocks, and is believed to explain the magnetic high anomaly the hole
drilled tested.
At this stage, there are no intersected intrusions identified in TRDD031 to help explain these
higher temperature minerals (tourmaline and bornite) and no deeper intrusions to explain the
significant chalcopyrite and magnetite in the various skarn horizons. This setting of sulphide
veining in upper volcanics supports the working interpretation of targeted causative intrusive
source being on a lateral setting – see Figure 1 for the section and working interpretation of the
Trundle Park southern extension zone.
The skarn zones and quartz sulphide veining in the overlying volcanics from holes TRDD029,
TRDD030 and TRDD031 provide important geological and mineral vectors for the targeted
causative intrusive porphyry source. The large mineralised skarns and vein systems are
suggestive of significant primary source.
Hole TRDD032, a 150m step-out to the south-east, is in progress following up these vectors,
which are coincident with the wider southern mineralised trend corridor and magnetic low.
Figure 2: Significant new mineralised zones and extension – the wider Trundle Park
system covers a ∼1.3 km strike and open
(a) Plan view of Trundle Park prospect, multiple visually significant mineralised zones in holes
TRDD029, TRDD030 and TRDD031 - see Figure 2 (b) & (c) for sections
0
200m
Collar
>0.5 CuEq % 3
0.1-0.5 CuEq % 3
Background Total Magnetic
Assay results pending (visual
lithology)
2 Designed & on-going hole TRDD032
3 AuEq at $1800/oz Au and 3.55lb Cu
(100% recoveries).
(b) Only three holes in but clear scale potential emerging in southern trend extension discovery zone
Working Leapfrog alteration model and section of the Trundle Park prospect
(Section line looking southeast through Figure 2 (a). Length ~1450m and width ~600m)
∼1.3km
Current strike (open)
TRDD031 1
Hole TRDD029
TRDD030 1
TRDD032 2
DRILL HOLE KEY
Collar
>0.5 CuEq % 3
0.1-0.5 CuEq % 3
GEOLOGY MODEL
Potassic Alteration
Upper skarn
Sericite Alteration
Skarn Alteration
Middle skarn
HOLE TRACES FOR TRDD030/31
Skarn (assays pending)
Lower skarn
1 Assay results pending
(visual lithology)
2 Designed & on-going hole TRDD032
3 AuEq at $1800/ oz Au and 3.55 lb Cu (100% recoveries).
(c) Key alteration, lithology in TRDD029/30/31 and intrusions with significant mineralised
intervals/holes - vectors to causative intrusive porphyry target
Illustration TRDD032 target: Section line looking southeast through Figure 2 (a). Length ~1450m and width ~600m
TRDD031 1
Hole TRDD029
DRILL HOLE KEY
Collar
>0.5 CuEq % 3
0.1-0.5 CuEq % 3
GEOLOGY MODEL
Monzonite
Monzodiorite
Sericite Alteration
Skarn Alteration
HOLE TRACES FOR TRDD029/30/31
Quartz-carbonate-chalcopyrite vein sets
Quartz-tourmaline-bornite-chalcopyrite veining
Skarn
1 Assay results pending
(visual lithology)
& on-going hole TRDD032
at $1800/ oz Au and 3.55 lb Cu (100% recoveries).
2 Designed
3 AuEq
TRDD030 1
TRDD032 2
Figure 3: Examples of key mineralised zones and vectors from hole TRDD0313
i. Volcanoclastic (pebbly) rocks with silica-magnetite alteration (dark-grey) with patchy epidote
alteration (lime green), from 282m. Lower photo: close up @ 285m showing a bleb of purple bornite
associated with epidote-quartz after K-feldspar (red-orange). Assay results pending.
Bn
ii. Volcanoclastics (pebbly) with early silica-magnetite alteration over printed by patchy epidote (Ep,
lime green) & K-feldspar (Kfs, orange-red) alteration from 327m. Lower photo: close up @ 330.6m
with bleb of bornite (Bn, purple) associated with epidote (Ep)-quartz (Qt) after K-feldspar (Kfs, redorange) & tourmaline (T, black). Assay results pending.
Kfs
Bn
Ep + Qt + T
iii. Volcanoclastics (pebbly) with early silica-magnetite alteration over printed by patchy epidote
(Ep, lime green) & K-feldspar (Kfs, orange-red) alteration. Lower photo: close up @ 334m with bleb
of chalcopyrite (Cpy, yellow) associated with epidote (Ep)-quartz (Qz) after K-feldspar (Kfs, redorange) & tourmaline (T, black). Assay results pending.
Kfs
Ep + Qt + T
Cpy
iv. Middle Skarn (prograde) with magnetite (Mag, >50%)- garnet (Gn, olive)-minor pyrite &
disseminated chalcopyrite, cut by later carbonate-quartz veins-with chalcopyrite (Cpy) from 777.4m.
Assay results pending.
Cpy
v. Middle Skarn (medial) bands of alternating garnet (Gn, tan-brown), prehnite (light blue-green) &
patchy magnetite (Mag, grey-black) cut by later retrograde quartz-carbonate-orthoclase-hematite
veins & void fillings containing pyrite & chalcopyrite (Cpy) from 798m. Assay results pending.
Gn
Mag
Gn
Cpy
Air-core drilling completed
As previously announced1, a second rig had been mobilized to complete a shallow aircore drilling program to test priority areas of the wider intrusive complex to the north
of Trundle Park at the Dunn’s and Ravenswood South prospects, located 2km north and
5.5km north-west respectively.
A total of 50 holes for 1,550 metres with average depths of only 31 metres have been
completed. The program has followed up previous broadly spaced copper-gold
geochemistry anomalies.
All holes are interpreted to have inserted basement under shallow post-mineral cover
(ranging from only 1.5 to 84 metres). The program has provided important new end of
hole lithology and geological understanding, interpreted to be similar to the Trundle
Park prospect, with prospective alteration, veining, magnetite and sulphides often
noted in the chips and the end of hole samples of core.
Dispatch of samples for assay geochemistry is scheduled for this week with results
expected in a further 8 weeks.
The program is expected to better understand the potential for nearer surface
intrusions, skarn altered zones and the extent of identified anomalous copper-gold
mineralisation at open pit target depths within these prospect areas, where previous
drilling has been broadly spaced relative to the nature of the narrow but vertically
extensive Macquarie Arc porphyry model and similar coverage at Northparkes or
Cadia.
1 February 22nd, 2022, “New higher-grade gold-copper system extension confirmed and expanded”
121 Mining Investment APAC conference
Ahead of the upcoming 121 Mining Investment APAC online conference an updated corporate
presentation, including further details on the Trundle project and recent drill results, is
available at www.kincoracopper.com
Registration details for pre-booked, online 1-2-1 meetings with management at the upcoming
conference are available at: www.weare121.com
Table 2: Trundle Park target hole TRDD029 – Summary of significant intervals
Hole ID
TRDD029
and
and
and
and
and
and
and
and
including
incl.
including
incl.
incl.
and
including
incl.
incl.
including
including
and
and
and
and
including
and
From (m)
148.0
384.0
452.0
464.0
472.0
536.0
588.0
630.0
732.0
732.0
734.0
742.0
752.0
756.0
828.0
931.0
935.0
938.0
948.0
959.0
970.0
972.0
977.0
981.0
988.0
1004.0
To (m)
150.0
388.0
454.0
466.0
474.0
538.0
590.0
632.0
768.0
736.0
736.0
764.0
754.0
758.0
967.0
965.0
942.0
939.0
953.0
965.0
971.0
975.0
980.0
994.0
994.0
1012.0
Interval (m)
2.0
4.0
2.0
2.0
2.0
2.0
2.0
2.0
36.0
4.0
2.0
22.0
2.0
2.0
139.0
34.0
7.0
1.0
5.0
6.0
1.0
3.0
3.0
13.0
6.0
8.0
Au (g/t)
0.19
0.04
0.08
0.06
0.02
0.12
0.15
0.15
0.68
1.19
1.94
0.78
1.08
0.96
0.17
0.38
0.66
1.17
0.59
0.40
0.19
0.13
0.35
0.13
0.18
0.11
Cu (%)
0.00
0.11
0.11
0.19
0.11
0.03
0.13
0.12
0.29
0.59
0.94
0.32
0.39
0.48
0.12
0.30
0.39
0.63
0.44
0.28
0.04
0.03
0.13
0.07
0.13
0.01
Mo (ppm)
0.00
6.00
1.00
1.00
1.00
4.00
1.00
1.00
1.61
2.50
0.00
0.82
0.00
1.00
8.78
9.59
5.57
2.00
4.40
6.17
10.00
14.33
2.67
2.85
3.00
3.25
Dilution (%)
0%
0%
0%
0%
0%
0%
0%
0%
6%
0%
0%
0%
0%
0%
32%
0%
0%
0%
0%
0%
0%
0%
0%
46%
0%
25%
Porphyry gold and copper intercepts are calculated using a lower cut of 0.10g/t and/or 0.05% respectively. Internal dilution is
below cut off; and, 1 Interpreted near surface skarn gold and copper intercepts are calculated using a lower cut of 0.20g/t and
0.10% respectively. Internal dilution is below cut off
Table 3: Trundle project - Collar Information
For further details, including QAQC procedures, please refer to the following press releases:
1.
July 6, 2020 - Kincora announces high-grade gold-copper results from first hole at Trundle
2.
July 23, 2020 - Kincora reports further strong encouragement at Trundle
3.
September 3, 2020 - Kincora provides update on expanded drilling program at Trundle
4.
November 30, 2020 - Kincora intersects broad mineralised zones at Trundle
5.
January 20, 2021 - Kincora intersects further shallow mineralization at Trundle
6.
March 2021 - Independent Technical Report for the ASX prospectus
7.
April 22, 2021 - Exploration Update
8.
July 8, 2021 - Exploration portfolio drilling update
9.
August 17 2021 - Significant gold-bearing intervals at Trundle Park
10.
December 7 2021 - Porphyry system extended to surface and depth at Trundle Park
11.
January 25, 2022 - Newly discovered higher-grade zones expand the large-scale gold-copper system at Trundle
Park
12.
March 2022 - Further confirmation of new discovery and broad intervals at Trundle Park
Table 4: Visual estimates and descriptions of Figure 1 core from TRDD031
In relation to the disclosure of selected intervals of drill core and visual mineralisation, the Company cautions that estimates of
sulphide mineral abundance and lithology from preliminary geological logging should not be considered a proxy for quantitative
analysis of laboratory assay results or detailed petrology. Assay results are required to determine the actual widths and grade of the
visual mineralisation. Geological logging will be further calibrated with full assay, petrology results and further team review.
Trundle Project background
The Trundle Project is located in the Junee-Narromine volcanic belt of the Macquarie Arc, less than 30km from the mill at the
Northparkes mines in a brownfield setting within the westerly rift separated part of the Northparkes Igneous Complex (“NIC”). The
NIC hosts a mineral endowment of approximately 24Moz AuEq (at 0.6% Cu and 0.2g/t Au) and is Australia’s second largest
porphyry mine comprising of 22 discoveries, 9 of which with positive economics.
The Trundle Project includes one single license covering 167km2 and was secured by Kincora in the March 2020 agreement with
RareX Limited (“REE” on the ASX). Kincora is the operator, holds a 65% interest in the Trundle Project and is the sole funder until
a positive scoping study is delivered at which time a fund or dilute joint venture will be formed.
For further information on the Trundle and Northparkes Projects please refer to Kincora’s website:
https://kincoracopper.com/the-trundle-project/
This announcement has been authorised for release by the Board of Kincora Copper Limited (ARBN 645 457 763)
For further information please contact:
Sam Spring, President and Chief Executive Officer
sam.spring@kincoracopper.com or +61431 329 345
For media enquiries:
Media & Capital Partners
Angela East at Angela.East@mcpartners.com.au
Executive office
Subsidiary office Australia
400 – 837 West Hastings Street
Leydin Freyer Corp Pty Ltd
Vancouver, BC V6C 3N6, Canada
Level 4, 100 Albert Road
Tel: 1.604.283.1722
South Melbourne, Victoria 3205
Fax: 1.888.241.5996
Forward-Looking Statements
Certain information regarding Kincora contained herein may constitute forward-looking statements within the meaning of
applicable securities laws. Forward-looking statements may include estimates, plans, expectations, opinions, forecasts, projections,
guidance or other statements that are not statements of fact. Although Kincora believes that the expectations reflected in such
forward-looking statements are reasonable, it can give no assurance that such expectations will prove to have been correct. Kincora
cautions that actual performance will be affected by a number of factors, most of which are beyond its control, and that future
events and results may vary substantially from what Kincora currently foresees. Factors that could cause actual results to differ
materially from those in forward-looking statements include market prices, exploitation and exploration results, continued
availability of capital and financing and general economic, market or business conditions. The forward-looking statements are
expressly qualified in their entirety by this cautionary statement. The information contained herein is stated as of the current date
and is subject to change after that date. Kincora does not assume the obligation to revise or update these forward-looking
statements, except as may be required under applicable securities laws.
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of
the TSX Venture Exchange) or the Australian Securities Exchange accepts responsibility for the adequacy or
accuracy of this release.
Drilling, Assaying, Logging and QA/QC Procedures
Sampling and QA/QC procedures are carried out by Kincora Copper Limited, and its contractors, using the Company’s protocols as
per industry best practise.
All samples have been assayed at ALS Minerals Laboratories, delivered to Orange, NSW, Australia. In addition to internal checks by
ALS, the Company incorporates a QA/QC sample protocol utilizing prepared standards and blanks for 5% of all assayed samples.
Diamond drilling was undertaken by DrillIt Consulting Pty Ltd, from Parkes, under the supervision of our field geologists. All drill
core was logged to best industry standard by well-trained geologists and Kincora’s drill core sampling protocol consisted a
collection of samples over all of the logged core.
Sample interval selection was based on geological controls or mineralization or metre intervals, and/or guidance from the Technical
Committee provided subsequent to daily drill and logging reports. Sample intervals are cut by the Company and delivered by the
Company direct to ALS.
All reported assay results are performed by ALS and widths reported are drill core lengths. There is insufficient drilling data to date
to demonstrate continuity of mineralised domains and determine the relationship between mineralization widths and intercept
lengths.
True widths are not known at this stage.
Significant mineralised intervals for drilling at the Trundle project are reported based upon two different cut off grade criteria:
•
Interpreted near surface skarn gold and copper intercepts are calculated using a lower cut of 0.20g/t and 0.10%
respectively; and,
•
Porphyry intrusion system gold and copper intercepts are calculated using a lower cut of 0.10g/t and 0.05% respectively.
Significant mineralised intervals are reported with dilution on the basis of:
•
Internal dilution is below the aforementioned respective cut off’s; and,
•
Dilutions related with core loss as flagged by a “*”.
The following assay techniques have been adopted for drilling at the Trundle project:
o
o
o
o
Gold: Au-AA24 (Fire assay), reported.
Multiple elements: ME-ICP61 (4 acid digestion with ICP-AES analysis for 33 elements) and ME-MS61 (4 acid digestion
with ICP-AES & ICP-MS analysis for 48 elements), the latter report for TRDD001 and former reported for holes
TRDD002-TRDD022.
Copper oxides and selected intervals with native copper: ME-ICP44 (Aqua regia digestion with ICP-AES analysis) has
been assayed, but not reported.
Assay results >10g/t gold and/or 1% copper are re-assayed.
Qualified Person
The scientific and technical information in this news release was prepared in accordance with the standards of the Canadian
Institute of Mining, Metallurgy and Petroleum and National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI
43-101”) and was reviewed, verified and compiled by Kincora’s geological staff under the supervision of Paul Cromie (BSc Hons.
M.Sc. Economic Geology, PhD, member of the Australian Institute of Mining and Metallurgy and Society of Economic Geologists),
Exploration Manager Australia, who is the Qualified Persons for the purpose of NI 43-101.
JORC Competent Person Statement
Information in this report that relates to Exploration Results, Mineral Resources or Ore Reserves has been reviewed and approved
by Mr. Paul Cromie, a Qualified Person under the definition established by JORC and have sufficient experience which is relevant
to the style of mineralization and type of deposit under consideration and to the activity being undertaking to qualify as a
Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources
and Ore Reserves’.
Paul Cromie (BSc Hons. M.Sc. Economic Geology, PhD, member of the Australian Institute of Mining and Metallurgy and Society
of Economic Geologists), is Exploration Manager Australia for the Company.
Mr. Paul Cromie consents to the inclusion in this report of the matters based on his information in the form and context in which it
appears.
The review and verification process for the information disclosed herein for the Trundle, Fairholme and Nyngan projects have
included the receipt of all material exploration data, results and sampling procedures of previous operators and review of such
information by Kincora’s geological staff using standard verification procedures.
JORC TABLE 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections).
Criteria
Sampling
techniques
JORC Code explanation
•
•
•
•
Drilling
techniques
Drill sample
recovery
•
•
•
•
Commentary
Nature and quality of sampling (e.g.
cut channels, random chips, or
specific specialised industry standard
measurement tools appropriate to the
minerals under investigation, such as
down hole gamma sondes, or
handheld XRF instruments, etc.).
These examples should not be taken as
limiting the broad meaning of
sampling.
Include reference to measures taken
to ensure sample representivity and
the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of
mineralisation that are Material to
the Public Report.
In cases where ‘industry standard’
work has been done this would be
relatively simple (e.g. ‘reverse
circulation drilling was used to obtain
1 m samples from which 3 kg was
pulverised to produce a 30 g charge
for fire assay’). In other cases more
explanation may be required, such as
where there is coarse gold that has
inherent sampling problems. Unusual
commodities or mineralisation types
(eg submarine nodules) may warrant
disclosure of detailed information
•
Drill type (e.g. core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic, etc) and details (e.g. core
diameter, triple or standard tube,
depth of diamond tails, face-sampling
bit or other type, whether core is
oriented and if so, by what method,
etc.).
•
Method of recording and assessing
core and chip sample recoveries and
results assessed.
Measures taken to maximise sample
recovery and ensure representative
nature of the samples.
Whether a relationship exists between
sample recovery and grade and
whether sample bias may have
occurred due to preferential loss/gain
of fine/coarse material.
•
•
•
•
•
•
•
•
•
•
•
•
•
Logging
•
•
•
Whether core and chip samples have
been geologically and geotechnically
logged to a level of detail to support
appropriate Mineral Resource
estimation, mining studies and
metallurgical studies.
Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc.) photography.
The total length and percentage of the
•
•
•
•
Kincora Copper Limited is the operator of the
Trundle Project, with drilling using diamond coring
and Air coring methods by DrillIt Consulting Pty
Ltd, from which sub-samples were taken over 2 m
intervals and pulverised to produce suitable
aliquots for fire assay and ICP-MS.
Diamond drilling was used to obtain orientated
samples from the ground, which was then
structurally, geotechnically and geologically logged.
Sample interval selection was based on geological
controls and mineralization.
Sampling was completed to industry standards with
1⁄4 core for PQ and HQ diameter diamond core and
1⁄2 core for NQ diameter diamond core sent to the
lab for each sample interval.
Samples were assayed via the following methods:
- Gold: Au-AA24 (Fire assay)
- Multiple elements: ME-ICP61 (4 acid digestion
with ICP-AES analysis for 33 elements) and MEMS61 (4 acid digestion with ICP-AES & ICP-MS
analysis for 48 elements)
- Copper oxides and selected intervals with native
copper: ME-ICP44 (Aqua regia digestion with ICPAES analysis) has been assayed, but not reported
- Assay results >10g/t gold and/or 1% copper are
re-assayed
Historic sampling on other projects included soils,
rock chips and drilling (aircore, RAB, RC and
diamond core).
Drilling by Kincora at Trundle used diamond core
drilling with PQ, HQ and NQ diameter core
depending on drilling depth and some shallow
depth Air core drilling.
All Kincora core was oriented using a Reflex ACE
electronic tool.
Historic drilling on Kincora projects used a variety
of methods including aircore, rotary air blast,
reverse circulation, and diamond core. Methods are
clearly stated in the body of the previous reports
with any historic exploration results.
Drill Core recovery was logged.
Diamond drill core recoveries are contained in the
body of the announcement.
Core recoveries were recorded by measuring the
total length of recovered core expressed as a
proportion of the dri
Share your feedback
Discover