POSITIVE ORE SORTING TESTWORK RESULTS FOR CUMMINS RANGE
Released
Released
Announcement PDF
ASX Release: 11 October 2022
POSITIVE ORE SORTING TESTWORK RESULTS A FURTHER BOOST FOR
CUMMINS RANGE RARE EARTHS AND PHOSPHATE PROJECT
Ore sorting offers potential to reduce plant size while maintaining product tonnage
HIGHLIGHTS
•
•
•
•
Preliminary metallurgical testwork shows promising ore sorting performance
Outstanding results achieved with a high REE recovery to Ore Sort Product and good mass
rejection
Very positive implications for project economics, particularly in light of the growing scale of
the Project
Primary flotation test work now underway both in Australia and with world experts, Baotou
Mengrong Fine Material Co. Ltd
RareX Limited (RareX, the Company) (ASX: REE) is pleased to report positive outcomes from an ore
sorting testwork program conducted on samples collected from its 100%-owned Cummins Range
Rare Earths Project (the Project, Cummins Range), located in the Kimberley region of Western
Australia.
The testwork was led by RareX with support from other consultancies, with results confirming the
amenability of the Cummins Range material to ore sorting technology and demonstrating the
potential to reduce the size of the beneficiation plant while maintaining the product tonnage.
RareX Managing Director, Jeremy Robinson, said: “This testwork shows that there is good potential
to upgrade the primary material ahead of grinding and flotation, essentially doubling the feed grade
for the Project and drastically improving the project economics. This is an exciting and very positive
development, particularly given the rapidly growing scale of the Project with current drilling. We are
looking forward to results from the next phase of primary flotation testwork, now underway.”
INTRODUCTION
The Cummins Range Rare Earths Project is a globally significant rare earths project located in the
Kimberley region of Western Australia near the township of Halls Creek. The Project has a JORC
Indicated and Inferred 2012 Mineral Resource Estimate (cut-off grade 0.5% TREO) containing 18.8
million tonnes of 1.15% TREO and 10% P2O5 with a high neodymium and praseodymium (NdPr) to
TREO ratio of 20% 1 .
1 ASX Announcement 19 July 2021: RareX delivers major resource upgrade at Cummins Range Rare Earths Project.
For more information, please contact:
Investors: Jeremy Robinson, Managing Director
Media: Nicholas Read, Read Corporate
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
Ph: +61 8 6383 6593
Ph: +61 8 9388 1474
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
The primary rare earth mineral in the weathered part of the deposit, with the deposit outcropping in
multiple locations. Within the primary part of the deposit both monazite and bastnaesite occur. The
major gangue minerals of the deposit include goethite, apatite, calcite/dolomite and silicates.
ORE SORTING PROGRAM
Sighter ore sorting testwork was performed on a composite collected from the primary zone of the
Cummins Range deposit at TOMRA Sorting Solution in NSW. The composite was crushed to a P100
grind size passing 30mm and screened at 10mm to prepare the feed for the ore sorting testwork.
This work was aimed at assessing the amenability of the Cummins Range material to ore sorting and
producing a high TREO product fraction with as-high-as-possible TREO recovery by way of highdensity REE-bearing inclusion product ejection.
The sorter used for this testwork was TOMRA’s COM Tertiary XRT (X-Ray Transmission) (Figure 1). To
set up/train the sorter and to parameterise the software, images were taken of the samples while
samples were exposed to high energy X-rays. The X-ray sensor signal depends on atomic density and
material thickness and gives information on the inner composition of the particles. By combining two
energy levels simultaneously, it is possible to differentiate particles by their atomic densities.
Figure 1: TOMRA COM Tertiary Sorter
Based on changes in the X-ray intensity, the images were mapped and classified as either high atomic
density (blue and black) or low atomic density (red) using proprietary TOMRA Sorting image
processing software, and the sorting-task algorithms specific for the Cummins Range ore were
developed. An example of the image processing is shown in Table 1.
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
Table 1: Raw (Left) and Processed (Right) XRT Images of Tested Material
Description
Low Atomic Density (Siliceous Waste)
High Atomic Density (REE Bearing Ore)
Background
Raw XRT Image
Given Colour
Red
Blue and black
Grey
Classified XRT Image
+10-30mm Feed
The +10-30mm material was fed through the trained ore sorter with a single pass to sort into the
product (REE-bearing ore) and waste. A summary of the ore sort results is included in Table 2.
Table 2: Ore Sort Results Summary
Mass
Element
TREO + Y
kg
% Distribution
Grade (%)
% Distribution
Feed, Calculated Assay
134.00
100%
2.18
100%
Ore Sort Waste
64.00
48%
0.34
7%
Ore Sort Product
70.00
52%
3.87
93%
As shown in the table above, 93% of the total rare earths in the feed material was successfully
maintained in the Ore Sort Product while rejecting 48% of the mass as waste. This is a very
encouraging result, demonstrating the amenability of the Cummins Range material to ore sorting
technology. The results have shown excellent potential to significantly reduce the plant size and
transport requirements from mine to the beneficiation plant while maintaining the rare earth
product tonnage through the inclusion of an ore sorting circuit to reject the gangue minerals upfront.
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
Given these positive results, further ore sorting testwork will be undertaken to improve on the
current results and optimise the ore sort circuit. This next phase of testwork will be carried out at
both a batch scale and at a larger scale using representative samples from the deposit.
PRIMARY FLOTATION TESTWORK
Further flotation test work is about to commence aiming to bulk float a combined rare earths and
phosphate concentrate for subsequent separation, including with magnetics. If successful, this would
give RareX increased optionality to decide which infrastructure components would be located at the
mine site compared with the coast.
Furthermore, given the presence of both monazite and bastnaesite in the primary ore zone – similar
to the giant Bayan Obo deposit in China – RareX has recently executed a non-disclosure agreement
with Baotou Mengrong Fine Material Co. Ltd, an independent, world leading rare earth laboratory in
China. A program is due to commence in November with a scope of work that will include testing
regimes using commercially available and bespoke flotation reagents on both the regolith and fresh
rock portions of the Cummins Range resource using samples aggregated to represent the run-of-mine
(ROM).
This announcement has been authorised for release by the Board of RareX Limited.
ABOUT RAREX LIMITED – ASX: REE
RareX Limited (ASX: REE) is a Perth-based rare earths company committed to becoming a near- term
producer of neodymium and praseodymium (NdPr). RareX’s focus is on developing rare earths
deposits in Australia, including the flag-ship Cummins Range Rare Earths – Phosphate Project.
NdPr is a core enabler of decarbonisation of our society and enables low carbon technologies,
especially in the electric mobility sector, robotics solutions and renewable energy, e.g. the wind
energy sector. NdPr is the key raw material for manufacturing rare earth powered permanent magnet
NdFeB electric motors, the heart of the next industrial revolution the Electrification of our Society.
RareX’s focus is on developing rare earths deposits in Australia, including the Cummins Range Rare
Earths Phosphate Project in the East Kimberley region of Western Australia. RareX is committed to
developing a sustainable, ethical, transparent and secure low carbon rare earth supply chain solution
for the global electric mobility market and NdFeB permanent motor downstream ecosystem.
For further information on the Company and its projects visit www.rarex.com.au
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
Competent Person’s Statements
The information in this release that relates to metallurgical testwork is based on information
compiled and / or reviewed by Mr Gavin Beer who is a Member of The Australasian Institute of Mining
and Metallurgy (AusIMM) and a Chartered Professional. Mr Beer is a consulting metallurgist with
sufficient experience relevant to the activity which he is undertaking to be recognised as competent
to compile and report such information. Mr Beer consents to the inclusion in the report of the
matters based on his information in the form and context in which it appears. Mr Beer does not hold
securities in RareX.
The mineral resource estimate in this announcement was reported by the Company in accordance
with Listing Rule 5.8 on 19 July 2021. The Company confirms it is not aware of any new information
or data that materially affects the information included in the previous announcement and that all
material assumptions and technical parameters underpinning the estimates in the previous
announcement continue to apply and have not materially changed.
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
Appendix 1: JORC Code, 2012 Edition – Table 1
Section 1: Sampling techniques and data - Metallurgy
Criteria
Sampling
techniques
JORC Code explanation
• Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc.).
These examples should not be taken as
limiting the broad meaning of sampling.
Commentary
• Diamond drill cores were sampled for the ore
sort testwork. Samples were selected based on
drill assays, drill hole location and intervals,
geological and mineralogical data. Samples were
riffle split from bulk samples and sent to Auralia
Metallurgy in Perth and/or Nagrom Perth and/or
ALS Perth for assays and further testwork.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any
measurement tools or systems used.
• Half core was sent to a laboratory to conduct
crushing, sampling and assaying. All laboratories
used in the assaying of the Cummins Range
material were checked for sampling and assaying
equipment and equipment calibrations /
accuracy.
• Aspects of the determination of
mineralisation that are Material to the
Public Report.
• Sample interval selection for the metallurgical
testwork was based on geological controls and
mineralisation of the deposit, the samples were
considered representative of the mineralisation
that were intended to be tested.
In cases where ‘industry standard’ work has
been done this would be relatively simple
(e.g. ‘reverse circulation drilling was used to
obtain 1m samples from which 3 kg was
pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation
may be required, such as where there is
coarse gold that has inherent sampling
problems. Unusual commodities or
mineralisation types (eg submarine
nodules) may warrant disclosure of detailed
information.
Drilling techniques
Drill sample
recovery
• Drill type (eg core, reverse circulation,
open-hole hammer, rotary air blast, auger,
Bangka, sonic, etc) and details (eg core
diameter, triple or standard tube, depth of
diamond tails, face-sampling bit or other
type, whether core is oriented and if so, by
what method, etc).
• Drilling techniques used for the Cummins Range
samples used for the metallurgical testwork
were:
• Method of recording and assessing core
and chip sample recoveries and results
assessed.
• Samples used for the metallurgical testwork were
quarter cores. Additional laboratory assays were
undertaken on the samples submitted for the
testwork and showed good alignments to the
drill assays.
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
o
Diamond drilling in 2021- 2022 using HQ and
PQ sized rods.
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
Logging
Sub-sampling
techniques and
sample
preparation
• Measures taken to maximise sample
recovery and ensure representative nature
of the samples.
• Larger and more capable rigs were used for
collection of the metallurgical samples which
allowed for good recoveries of samples. During
each drill program, all drill rigs were checked by
professional geologists, and all drill holes were
logged and monitored for recoveries and
accuracy prior to sample splitting and logging.
• Whether a relationship exists between
sample recovery and grade and whether
sample bias may have occurred due to
preferential loss/gain of fine/coarse
material.
• Holes used for the metallurgical testwork had
good sample recovery hence minor sample bias.
There is no distinctive relationship exist between
sample recovery and grade.
• Whether core and chip samples have been
geologically and geotechnically logged to a
level of detail to support appropriate
Mineral Resource estimation, mining
studies and metallurgical studies.
• All samples used for the metallurgical testwork
were geologically logged to a detail level that
supported the metallurgical studies.
• Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
• The logging is qualitative and quantitative in
nature for the metallurgy samples. The recorded
details included; lithology, grainsize, weathering,
colour, alteration, sulphide quantity and type,
structure and veining. Photos were taken for all
core samples.
• The total length and percentage of the
relevant intersections logged.
• Logging of all metallurgical samples were carried
out on geological intervals.
• If core, whether cut or sawn and whether
quarter, half or all core taken.
• Cores were cut in half and quarter, quarter cores
from each selected interval were used for this
metallurgical testwork.
• If non-core, whether riffled, tube sampled,
rotary split, etc and whether sampled wet
or dry.
• N/A
• For all sample types, the nature, quality
and appropriateness of the sample
preparation technique.
• Samples used for the metallurgical testwork were
diamond drill cores which were split and
prepared with appropriate equipment. Where
required, the samples were crushed / ground
and/or chemically treated to ensure the samples
were properly prepared for the required
testwork.
• Quality control procedures adopted for all
sub-sampling stages to maximise
representivity of samples.
• All sample preparation and sampling equipment
was cleaned with adequate procedures before
taking of each sample to ensure there is no crosscontamination between samples.
• Measures taken to ensure that the
sampling is representative of the in-situ
material collected, including for instance
• Drill assays, mineralogical and geological
information were reviewed for selection
testwork samples. Additional assays on the
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
results for field duplicate/second-half
sampling.
Quality of assay
data and
laboratory tests
Verification of
sampling and
assaying
Location of data
points
samples showed high repeatability of drill assays
suggesting good representivity of the in-situ
material hence no further sampling was required.
• Whether sample sizes are appropriate to
the grain size of the material being
sampled.
• The metallurgical sample sizes were appropriate
to the grain size of the material being sampled.
Where necessary, material was crushed and/or
pulverised before riffle / rotary split to ensure
good consistency of sampling representivity.
• The nature, quality and appropriateness of
the assaying and laboratory procedures
used and whether the technique is
considered partial or total.
• The assay analyses of all samples were conducted
by registered laboratories (i.e., ALS and Nagrom
etc.) with suitable equipment and well-known
quality assurance accreditation to ensure the
accuracy of the assay results. Samples were
assayed by X-ray fluorescence (XRF) and
Inductively Coupled Plasma (ICP).
• For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the
analysis including instrument make and
model, reading times, calibrations factors
applied and their derivation, etc.
• There was no reliance upon geophysical tools,
spectrometers, or any other techniques for the
required metallurgical testwork apart from the
use of a portable XRF to quickly track the
progress of metallurgical tests. These XRF results
were later confirmed with ICP analysis at the
laboratory. The XRF had been calibrated for very
elevated levels of REE and phosphate. System
checks, blanks and standards were analysed
before any PXRF readings were taken.
• Nature of quality control procedures
adopted (e.g. standards, blanks, duplicates,
external laboratory checks) and whether
acceptable levels of accuracy (i.e. lack of
bias) and precision have been established.
• The metallurgical samples were tested against
the standards and the good alignments to drill
assays confirmed the accuracy of the results.
Bench-top XRF assays were also verified with
additional ICP assays and the XRF equipment was
further calibrated to ensure the precision is well
established.
• The verification of significant intersections
by either independent or alternative
company personnel.
• There are no significant intercepts mentioned in
this announcement.
• The use of twinned holes.
• Twin holes were not used for collection of
metallurgical samples.
• Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
• An electronic geological database was used for
data storage. For metallurgical testwork, all raw
data from laboratories, results analysis and
summary reports were documented in a
metallurgy database.
• Discuss any adjustment to assay data.
• No adjustment was made to the assay data.
• Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and
• Drill hole collar locations for the metallurgical
testwork have been surveyed using a differential
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
other locations used in Mineral Resource
estimation.
Data spacing and
distribution
Orientation of data
in relation to
geological
structure
Sample security
GPS with accuracy to 0.1 m.
• Specification of the grid system used.
• GDA94, MGA Zone 52
• Quality and adequacy of topographic
control.
• Drillhole collar locations for the metallurgical
testwork have been surveyed using a differential
GPS with accuracy to 0.1m.
• Data spacing for reporting of Exploration
Results.
• For the fresh core samples, the drill holes that
the metallurgical samples came from were
spread out over 400 m of strike and range from
70 m down hole to 285 m down hole.
• Whether the data spacing and distribution
is sufficient to establish the degree of
geological and grade continuity appropriate
for the Mineral Resource and Ore Reserve
estimation procedure(s) and classifications
applied.
• The data spacing is considered appropriate for
the metallurgical testwork at this study level.
• Whether sample compositing has been
applied.
• Samples were all composited for the
metallurgical testwork. Representative portion of
each selected intervals were sent to the
designated laboratories to undergo staged
crushing and grinding before being composited
and homogenised with suitable equipment.
Where drill cores were used for the testwork,
quarter cores were crushed into suitable sizes
before splitting the representative samples used
for composition.
• Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
known, considering the deposit type.
• The orientation of the metallurgical sampling is
not considered to be biased towards any
geological characteristics.
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to
have introduced a sampling bias, this
should be assessed and reported if
material.
• N/A
• The measures taken to ensure sample
security.
• All metallurgical samples were secured with
appropriate labelling system. Samples were
labelled with standard designations and were
stored in locked shed. Samples were transported
to Perth from site by reputable transport
companies. Individual bags are cable tied and the
pallets are wrapped in plastic with detailed
logging sheet included.
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
Audits or reviews
• The results of any audits or reviews of
sampling techniques and data.
• No audits were undertaken however the
Competent Person was involved in all stages of
the metallurgical sampling and tests. In-house
reviews were also completed on the sampling
techniques and testwork results.
Section 2: Exploration Results - Metallurgy
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral tenement
and land tenure
status
• Type, reference name/number, location
and ownership including agreements or
material issues with third parties such as
joint ventures, partnerships, overriding
royalties, native title interests, historical
sites, wilderness or national park and
environmental settings.
• The Cummins Range deposit is located on
tenement E80/5092 and is 100% owned by
Cummins Range Pty Ltd which is a wholly owned
subsidiary of RareX Ltd. Cummins Range Pty Ltd
purchased the tenement from Element 25 with a
potential capped royalty payment of AU$1m
should a positive PFS be completed within 36
months of purchase finalisation.
• The security of the tenure held at the time
of reporting along with any known
impediments to obtaining a licence to
operate in the area.
• No security or impediments with tenement
E80/5092
• Acknowledgment and appraisal of
exploration by other parties.
• CRA Exploration defined REO mineralisation at
Cummins Range in 1978 using predominantly
aircore drilling. Navigator Resources progressed
this discovery with additional drilling after
purchasing the tenement in 2006. Navigator
announced a resource estimate in 2008. Kimberly
Rare Earths drilled additional holes and upgraded
the resource estimate in 2012.
Exploration done
by other parties
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
Criteria
JORC Code explanation
Commentary
Geology
• Deposit type, geological setting and style of
mineralisation.
• The Cummins Range REO deposit occurs within
the Cummins Range carbonatite complex which
is a 2.0 km diameter near-vertical diatreme pipe
that has been deeply weathered but essentially
outcropping with only thin aeolian sand cover in
places. The diatreme pipe consists of various
mafic to ultramafic rocks with later carbonatite
intrusions. The primary ultramafic and
carbonatite rocks host low to high grade rare
earth elements with back ground levels of 10002000 ppm TREO and high grade zones up to 17%
TREO. The current resource sits primarily within
the oxidised/weathered zone which reaches to
120m below the surface. Metallurgical studies
carried out to date show that the rare earth
elements are primarily hosted by Monazite which
is a common and favourable host for rare earth
elements.
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
Criteria
JORC Code explanation
Commentary
Drillhole
Information
• A summary of all information material to
the understanding of the exploration
results including a tabulation of the
following information for all Material drill
holes:
• Drill hole information from 2007-2012 drilling can
be found in the previous announced resource to
the ASX dated 15, October 2019.
o
easting and northing of the drill hole
collar
elevation or RL (Reduced Level –
elevation above sea level in metres) of
the drill hole collar
o
17th, December 2020
o
o
27th, October 2020
o
19th, October 2020
o
dip and azimuth of the hole
o
30th, September 2020
o
down hole length and interception
depth
o
hole length.
• If the exclusion of this information is
justified on the basis that the information is
not Material and this exclusion does not
detract from the understanding of the
report, the Competent Person should
clearly explain why this is the case.
RareX - ASX:REE
ABN: 65 105 578 756
• The RareX 2020 infill drill hole details and assays
can be found in the ASX announcements dated as
below:
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
• The RareX 2021-2022 drill hole details and assays
can be found in the ASX announcements dated as
below:
o
20th, September 2022
o
31st, August 2022
o
9th, August 2022
o
27th, May 2022
o
25th, May 2022
o
30th, March 2022
o
14th, February 2022
o
18th, January 2022
o
22nd, November 2021
o
11th, November 2021
o
23rd, September 2021
o
9th, September 2021
o
2nd, September 2021
o
29th, July 2021
• N/A
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
Criteria
JORC Code explanation
Commentary
Data aggregation
methods
• In reporting Exploration Results, weighting
averaging techniques, maximum and/or
minimum grade truncations (eg cutting of
high grades) and cut-off grades are usually
Material and should be stated.
• The resource has been reported using cut-off
grades of 0.5% and 1.0% TREO and are
considered appropriate for a potential open
mining scenario and metallurgical testwork.
• Where aggregate intercepts incorporate
short lengths of high-grade results and
longer lengths of low grade results, the
procedure used for such aggregation should
be stated and some typical examples of
such aggregations should be shown in
detail.
• No aggregate intercepts incorporate short
lengths of high-grade results and longer lengths
of low grade results.
• The assumptions used for any reporting of
metal equivalent values should be clearly
stated.
• N/A
• These relationships are particularly
important in the reporting of Exploration
Results.
• The Cummins Range resource is mostly located in
the regolith profile of the Cummins Range
diatreme. The weathering profile has created
super high grade REE mineralisation with
significant vertical and horizonal development.
These high grade intersections are mostly
focused along a north west structure that
extends for over 800 m. Thick vertical
intersections along this structure will thin as you
move towards the north east or south west. The
horizontal development of these zones can reach
up to hundreds of metres. Mineralisation is
developing in favourable horizons within the
regolith and is interpreted to be horizontal. All of
the drilling where the metallurgical samples were
taken from were at 60 degrees to the south and
is sufficient to test a horizontal ore body.
Relationship
between
mineralisation
widths and
intercept lengths
Diagrams
• If the geometry of the mineralisation with
respect to the drill hole angle is known, its
nature should be reported.
• If it is not known and only the down hole
lengths are reported, there should be a
clear statement to this effect (eg ‘down
hole length, true width not known’).
• No drill intercepts have been reported in this
announcement.
• Appropriate maps and sections (with
scales) and tabulations of intercepts should
be included for any significant discovery
being reported. These should include, but
not be limited to a plan view of drill hole
collar locations and appropriate sectional
views.
• N/A
RareX - ASX:REE
ABN: 65 105 578 756
Unit 6, 94 Rokeby Road
Subiaco, WA 6008, Australia
info@rarex.com.au
+61 (0) 8 6383 6593
RareX limited
www.rarex.com.au
@rarex_asx
Criteria
JORC Code explanation
Commentary
Balanced reporting
• Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low and
high grades and/or widths should be
practiced avoiding misleading reporting of
Exploration Results.
• The results of all metallurgical tests performed in
this program have been report. No results have
been excluded.
Other substantive
exploration data
• Other exploration data, if meaningful and
material, should be reported including (but
not limited to): geological observations;
geophysical survey results; geochemical
survey results; bulk samples – size and
method of treatment; metallurgical test
results; bulk density, groundwater,
geotechnical and rock characteristics;
potential deleterious or contaminating
substances.
• N/A
Further work
• The nature and scale of planned further
work (e.g. tests for lateral extensions or
depth extensions or large-scale step-out
drilling).
Share your feedback
Discover